Generic upgrade infrastructure for embedded systems
Generic upgrade infrastructure for embedded systems.
- Generic upgrade infrastructure for embedded systems.
- Atilla Filiz, Arnout Vandecappelle
Experience as an embedded software contractor shows that most clients need a means to upgrade their devices in the field. Often these solutions are ad-hoc, and need to be redone for each project, although requirements are similar.
A collection of scripts and permissively licensed source code will help device manufacturers to rapidly and safely implement a secure, fail-safe, atomic upgrade system for their devices.
The infrastructure will allow an embedded system to have one backup firmware, and one or two main firmware partitions. When a new firmware is downloaded and written as a main firmware, the upgrade system makes sure the device can boot. If the upgrade fails due to power, file corruption or other factors, the system recovers by booting the previous firmware or a failsafe firmware to retry upgrading.
Having this feature will prevent reinventing the wheel for each new product when it comes to upgrading.
- FOSDEM/ELC-E Presentation:
- Generic project repository with detailed documentation:
- CGI based project repository:
- Linupdate + barebox
- Jean-Christophe PLAGNIOL-VILLARD says that he and others are currently working on a similar project with a full c application under GPLv2 called linupdate + barebox. It is intended to will support secure boot platforms such as STB
A basic system can be implemented and unit tested in six person-weeks. This includes support for a single bootloader (U-Boot), for overwriting an MTD partition and a UBI volume. This also includes a wire format for the upgrade image and documentation for the platform-specific part, needed per project. Additional partition types (e.g. mbr) or bootloaders (e.g. barebox) require additional effort.
Arnout Vandecappelle (Essensium/Mind)