Difference between revisions of "Hack A10 devices"
(→Get a console)
|Line 60:||Line 60:|
== Get a console ==
== Get a console ==
Allwinner uses a config file for hardware configuration, a config file is a Windows ini file, you can download
Allwinner uses a config file for hardware configuration, a config file is a Windows ini file, you can download [http://goo.gl/QKXn6 here], which is something like this.
|Line 67:||Line 67:|
The A10 uart can be
The A10 uart can be , . the uart , and , you can
To get the param working you need another tool, script, download the linux version [http://goo.gl/Zwhbk here]
Revision as of 22:40, 25 December 2011
Hack A10 Devices
This page describe how to hack a A10 powered tablet and let a custom kernel to run on the tablet. The work was done on an Ainol Novo 7 Advanced tablet. But should be working on all A10 based tablet. Since A10 can boot from usb, never worry about bricking your device.
The stock firmware in my Novo7 is android 2.3.4. With android adb i can log into the device and take a look at inside.
# mkdir /sdcard/nanda # mount -t vfat /dev/block/nanda /sdcard/nanda # ls /sdcard/nanda boot.axf boot.ini drv_de.drv font24.sft font32.sft linux os_show script.bin script0.bin sprite sprite.axf magic.bin
# ls /sdcard/nanda/linux bImage linux.ini params paramsr recovery.ini
# cat /sdcard/nanda/linux/linux.ini [segment] img_name = c:\linux\bImage img_size = 0x2000000 img_base = 0x40008000 [segment] img_name = c:\linux\params img_size = 0x100 img_base = 0x40000100 [script_info] script_base = 0x43000000 script_size = 0x10000 [logo_info] logo_name = c:\linux\android.bmp logo_address = 0x48000000 logo_show = 1
As you can see the linux/bImage is our kernel, and the linux/linux.ini is a config file that some loader reads, and load the file bImage to 0x40008000 address. And the file linux/params is the kernel cmdline.
# cat /sdcard/nanda/linux/params console=ttyS0,115200 root=/dev/nandb rw init=/init fbmem=32M@0x5a000000 loglevel=8;
And recovery.ini and paramsr is for android recovery boot and cmdline.
Get a console
Allwinner uses a config file for hardware configuration, a config file is a Windows ini file, you can download the config file for novo7 advanced here, which is something like this.
[uart_para] uart_debug_port = 0 uart_debug_tx =port:PB22<2> uart_debug_rx =port:PB23<2>
The A10 uart rx and tx pin can be configured by software, usually PB22 and PB23 are for uart rx and tx, PF2 and PF4 for sdcard. But software can change this, let PF2 and PF4 be the uart rx and tx and disable sdcard, thus the usual sdcard clock pin and data3 pin is uart rx and tx. So with a TTL serial to USB cable, you can get a uart on your device.
To get the param working you need another tool, called script, download the linux version here