Difference between revisions of "Hack A10 devices"

From eLinux.org
Jump to: navigation, search
(Get a console)
(Get a console)
Line 124: Line 124:
 
</pre>
 
</pre>
 
you will get a file called sys_config1.bin.
 
you will get a file called sys_config1.bin.
 +
Now push it to the device
 +
<pre>
 +
$adb push sys_config1.bin /sdcard/nanda
 +
3819 KB/s (40648 bytes in 0.010s)
 +
$adb shell
 +
#cd /sdcard/nanda
 +
#ls
 +
boot.axf
 +
boot.ini
 +
drv_de.drv
 +
font24.sft
 +
font32.sft
 +
linux
 +
os_show
 +
script.bin
 +
script0.bin
 +
sprite
 +
sprite.axf
 +
magic.bin
 +
sys_config1.bin
 +
</pre>

Revision as of 06:17, 26 December 2011

Hack A10 Devices

This page describe how to hack a A10 powered tablet and let a custom kernel to run on the tablet. The work was done on an Ainol Novo 7 Advanced tablet. But should be working on all A10 based tablet. Since A10 can boot from usb, never worry about bricking your device.

First sight

The stock firmware in my Novo7 is android 2.3.4. With android adb i can log into the device and take a look at inside.

# mkdir /sdcard/nanda
# mount -t vfat /dev/block/nanda /sdcard/nanda
# ls /sdcard/nanda
boot.axf
boot.ini
drv_de.drv
font24.sft
font32.sft
linux
os_show
script.bin
script0.bin
sprite
sprite.axf
magic.bin
# ls /sdcard/nanda/linux
bImage
linux.ini
params
paramsr
recovery.ini
# cat /sdcard/nanda/linux/linux.ini
[segment]
img_name = c:\linux\bImage
img_size = 0x2000000
img_base = 0x40008000

[segment]
img_name = c:\linux\params
img_size = 0x100
img_base = 0x40000100

[script_info]
script_base = 0x43000000
script_size = 0x10000

[logo_info]
logo_name = c:\linux\android.bmp
logo_address = 0x48000000
logo_show = 1

As you can see the linux/bImage is our kernel, and the linux/linux.ini is a config file that some loader reads, and load the file bImage to 0x40008000 address. And the file linux/params is the kernel cmdline.

# cat /sdcard/nanda/linux/params
console=ttyS0,115200 root=/dev/nandb rw init=/init fbmem=32M@0x5a000000 loglevel=8;

And recovery.ini and paramsr is for android recovery boot and cmdline.

Get a console

Allwinner uses a config file for hardware configuration, a config file is a Windows ini file, you can download the config file for novo7 advanced sys_config1.fex, which is something like this.

[uart_para]
uart_debug_port          = 0
uart_debug_tx            =port:PB22<2>
uart_debug_rx            =port:PB23<2>

The A10 uart rx and tx pin can be configured by software, usually PB22 and PB23 are for uart rx and tx, PF2 and PF4 for sdcard. But software can change this, let PF2 and PF4 be the uart rx and tx and disable sdcard, thus the usual sdcard clock pin and data3 pin is uart rx and tx. So with a TTL serial to USB cable, you can get a console from the sdcard slot.

change the following two places in the sys_config1.fex

[uart_para]
uart_debug_port          = 0
uart_debug_tx            =port:PB22<2>
uart_debug_rx            =port:PB23<2>
[uart_para0]
uart_used                = 1
uart_port                = 0
uart_type                = 2
uart_tx                  =port:PB22<2>
uart_rx                  =port:PB23<2>
[mmc0_para]
sdc_used                 =1
sdc_detmode              = 1
bus_width                = 4

to

[uart_para]
uart_debug_port          = 0
uart_debug_tx            = port:PF2<2>
uart_debug_rx            = port:PF4<2>
[uart_para0]
uart_used                = 1
uart_port                = 0
uart_type                = 2
uart_tx                  = port:PF2<2>
uart_rx                  = port:PF4<2>

(disable sdcard0)

[mmc0_para]
sdc_used                 = 0
sdc_detmode              = 1
bus_width                = 4

To get the param working you need a pc tool, download the linux version script. This tool parses the ini file, and write the data to a bin file. Execute the downloaded program on your desktop

$./script sys_config1.fex 
argc = 2
input name sys_config1.fex
Script 1 source file Path=/tmp/sys_config1.fex
Script 1 bin file Path=/tmp/sys_config1.bin
parser 1 file ok

you will get a file called sys_config1.bin. Now push it to the device

$adb push sys_config1.bin /sdcard/nanda
3819 KB/s (40648 bytes in 0.010s)
$adb shell
#cd /sdcard/nanda
#ls
boot.axf
boot.ini
drv_de.drv
font24.sft
font32.sft
linux
os_show
script.bin
script0.bin
sprite
sprite.axf
magic.bin
sys_config1.bin