Difference between revisions of "Hammer Board HOWTOS"

From eLinux.org
Jump to: navigation, search
(Removed link to deleted page.)
 
(17 intermediate revisions by 7 users not shown)
Line 1: Line 1:
 
This is the index for the How-To section
 
This is the index for the How-To section
  
[[Hammer_How_to_Swtching_5V_Regulator|How to add a Switching 5V regulator]] to the [[Hammer_Carrier]]
+
[[Hammer_Getting_Started|Getting Started]] - A step by step guide to getting started with the [[Hammer_Board]]
 +
 
 +
[[Hammer_How_to_build_Kernel|How to build a custom kernel]] for the [[Hammer_Board]]
 +
 
 +
[[Hammer_How_to_buildroot|How to build the buildroot]] and the kernel for the [[Hammer_Board]]
 +
 
 +
[[Hammer_How_to_Thumb_Drive|How to add a USB Thumb Drive]] to the [[Hammer_Board]]
  
 
[[Hammer_How_to_USB_Ethernet|How to add a USB Ethernet]] adapter to the [[Hammer_Board]]
 
[[Hammer_How_to_USB_Ethernet|How to add a USB Ethernet]] adapter to the [[Hammer_Board]]
 +
 +
[[Hammer_How_to_JFFS2_Root|How to use JFFS2 Flash]] for the root partition on [[Hammer_Board]]
 +
 +
[[Hammer_How_to_USB_FTDI|How to add a USB FTDI Serial]] adapter to the [[Hammer_Board]]
  
 
[[Hammer_How_to_Enc28j60|How to add an ENC28j60 SPI ethernet interface]] to the [[Hammer_Board]]
 
[[Hammer_How_to_Enc28j60|How to add an ENC28j60 SPI ethernet interface]] to the [[Hammer_Board]]
  
[[Hammer_How_to_buildroot|How to build a rootfs]] and the kernel for the [[Hammer_Board]]
+
[[Hammer_How_to_Networking|TCPIP Networking,]] Getting the .config necessary for TCPIP to work.
 +
 
 +
[[Hammer_How_to_Console|How To Console]] Settings and minimal configurations for console interface.
  
[[Hammer_How_to_Networking|TCPIP Networking,]] Getting the .config neccessary for TCPIP to work.
+
[[Hammer_How_to_Reflash_Apex_and_kernel|How to reflash Apex & the Kernel]]
  
[[Hammer_How_to_Console|How To Console]] Settings and minimal configurations for console interface.
+
[[Hammer_How_to_use_Jtag|How use the flyswatter]] to recover from a bricked [[Hammer_Board]]
 +
 
 +
[[Hammer_How_to_use_LCD|How to add an LCD]] to the [[Hammer_Board]]
 +
 
 +
[[Hammer_Uart2_Configuration|How to Configure Uart2]] on the [[Hammer_Board]]
  
[[How_to_Reflash_Apex_and_kernel|How to reflash Apex & the Kernel]]
+
[[Hammer_LED_Driver_Module]]  
  
 
[[Category:TCT-Hammer]]
 
[[Category:TCT-Hammer]]
 
[[Category:TinCanTools]]
 
[[Category:TinCanTools]]

Latest revision as of 18:25, 27 January 2010

This is the index for the How-To section

Getting Started - A step by step guide to getting started with the Hammer_Board

How to build a custom kernel for the Hammer_Board

How to build the buildroot and the kernel for the Hammer_Board

How to add a USB Thumb Drive to the Hammer_Board

How to add a USB Ethernet adapter to the Hammer_Board

How to use JFFS2 Flash for the root partition on Hammer_Board

How to add a USB FTDI Serial adapter to the Hammer_Board

How to add an ENC28j60 SPI ethernet interface to the Hammer_Board

TCPIP Networking, Getting the .config necessary for TCPIP to work.

How To Console Settings and minimal configurations for console interface.

How to reflash Apex & the Kernel

How use the flyswatter to recover from a bricked Hammer_Board

How to add an LCD to the Hammer_Board

How to Configure Uart2 on the Hammer_Board

Hammer_LED_Driver_Module