Difference between revisions of "Hammer Board HOWTOS"
KenMcGuire (talk | contribs) |
KenMcGuire (talk | contribs) |
||
Line 1: | Line 1: | ||
This is a place holder for the How-To section | This is a place holder for the How-To section | ||
− | How to get an [http://elinux.org/Enc28j60 | + | How to get an [http://elinux.org/Enc28j60 ENC28J60-H] working on the Hammer board |
− | First you have to get an | + | First you have to get an ENC28J60-H, the following links may be usefull: |
*[http://www.sparkfun.com/commerce/product_info.php?products_id=765 SparkFun] | *[http://www.sparkfun.com/commerce/product_info.php?products_id=765 SparkFun] | ||
Line 12: | Line 12: | ||
Next we will be soldering it on to the [http://elinux.org/Hammer_Carrier Hammer Carrier board] | Next we will be soldering it on to the [http://elinux.org/Hammer_Carrier Hammer Carrier board] | ||
− | We will need an aux 3.3V regulator as the | + | We will need an aux 3.3V regulator as the ENC28J60-H can draw up to 250ma from its supply. |
− | Make sure that your 5V main power supply can supply the Hammer as well as the | + | Make sure that your 5V main power supply can supply the Hammer as well as the ENC28J60-H. |
Insert picture of the result | Insert picture of the result | ||
− | Insert picture of the wires soldered to the | + | Insert picture of the wires soldered to the SPI, VccAux & Gnd points |
Software driver info: | Software driver info: |
Revision as of 17:15, 31 July 2007
This is a place holder for the How-To section
How to get an ENC28J60-H working on the Hammer board
First you have to get an ENC28J60-H, the following links may be usefull:
Next we will be soldering it on to the Hammer Carrier board
We will need an aux 3.3V regulator as the ENC28J60-H can draw up to 250ma from its supply. Make sure that your 5V main power supply can supply the Hammer as well as the ENC28J60-H.
Insert picture of the result
Insert picture of the wires soldered to the SPI, VccAux & Gnd points
Software driver info:
The Good Kernel SPI API The Bad & The Ugly The current "driver"