Difference between revisions of "Hammer Board HOWTOS"

From eLinux.org
Jump to: navigation, search
Line 1: Line 1:
 
This is a place holder for the How-To section
 
This is a place holder for the How-To section
  
How to get an [http://elinux.org/Enc28j60 ENC28J60-H] working on the Hammer board
+
How to get an [Enc28j60 ENC28J60-H] working on the Hammer board
  
First you have to get an ENC28J60-H, the following links may be usefull:
+
First you have to get an [Enc28j60 ENC28J60-H], the following links may be usefull:
  
 
*[http://www.sparkfun.com/commerce/product_info.php?products_id=765 SparkFun]
 
*[http://www.sparkfun.com/commerce/product_info.php?products_id=765 SparkFun]
Line 10: Line 10:
 
*[http://microcontrollershop.com/product_info.php?cPath=98&products_id=1390 uC Pro's]
 
*[http://microcontrollershop.com/product_info.php?cPath=98&products_id=1390 uC Pro's]
  
Next we will be soldering it on to the [http://elinux.org/Hammer_Carrier Hammer Carrier board]
+
Next we will be soldering it on to the [Hammer_Carrier Hammer Carrier board]
  
 
We will need an aux 3.3V regulator as the ENC28J60-H can draw up to 250ma from its supply.
 
We will need an aux 3.3V regulator as the ENC28J60-H can draw up to 250ma from its supply.

Revision as of 14:38, 1 August 2007

This is a place holder for the How-To section

How to get an [Enc28j60 ENC28J60-H] working on the Hammer board

First you have to get an [Enc28j60 ENC28J60-H], the following links may be usefull:

Next we will be soldering it on to the [Hammer_Carrier Hammer Carrier board]

We will need an aux 3.3V regulator as the ENC28J60-H can draw up to 250ma from its supply. Make sure that your 5V main power supply can supply the Hammer as well as the ENC28J60-H.

Insert picture of the result

Insert picture of the wires soldered to the SPI, VccAux & Gnd points

Software driver info:

The Good  Kernel SPI API
  The Bad  &
    The Ugly  The current "driver"