Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

Hammer Board HOWTOS

From eLinux.org
Revision as of 01:25, 28 January 2010 by Wmat (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This is the index for the How-To section

Getting Started - A step by step guide to getting started with the Hammer_Board

How to build a custom kernel for the Hammer_Board

How to build the buildroot and the kernel for the Hammer_Board

How to add a USB Thumb Drive to the Hammer_Board

How to add a USB Ethernet adapter to the Hammer_Board

How to use JFFS2 Flash for the root partition on Hammer_Board

How to add a USB FTDI Serial adapter to the Hammer_Board

How to add an ENC28j60 SPI ethernet interface to the Hammer_Board

TCPIP Networking, Getting the .config necessary for TCPIP to work.

How To Console Settings and minimal configurations for console interface.

How to reflash Apex & the Kernel

How use the flyswatter to recover from a bricked Hammer_Board

How to add an LCD to the Hammer_Board

How to Configure Uart2 on the Hammer_Board

Hammer_LED_Driver_Module