Hammer Board HOWTOS

From eLinux.org
Revision as of 11:46, 16 June 2008 by Rohde (Talk | contribs)

Jump to: navigation, search

This is the index for the How-To section

Getting Started - A step by step guide to getting started with the Hammer_Board

How to add a Switching 5V regulator to the Hammer_Carrier

How to build a custom kernel for the Hammer_Board

How to build the buildroot and the kernel for the Hammer_Board

How to add a USB Thumb Drive to the Hammer_Board

How to add a USB Ethernet adapter to the Hammer_Board

How to use JFFS2 Flash for the root partition on Hammer_Board

How to add a USB FTDI Serial adapter to the Hammer_Board

How to add an ENC28j60 SPI ethernet interface to the Hammer_Board

TCPIP Networking, Getting the .config neccessary for TCPIP to work.

How To Console Settings and minimal configurations for console interface.

How to reflash Apex & the Kernel

How use the flyswatter to recover from a bricked Hammer_Board

How to add an LCD to the Hammer_Board

Using UART2 on the Hammer_Board