Difference between revisions of "Hammer Buzzer Driver"
(Add Category Hammer) |
|||
Line 18: | Line 18: | ||
(tone stops) | (tone stops) | ||
</pre> | </pre> | ||
+ | |||
+ | [[Category:Hammer]] |
Revision as of 06:13, 13 May 2011
UserSpace Access
the buzzer on the carrier board can be accessed from userspace via the sysfs interface. example interfaces are in the directory marked /sys/devices/platform/tct_hammer-beeper.0/input:input1. the directory include a file entry "beep" and "duration". to generate a beep echo a non zero value to the beep file entry:
echo 4096 > /sys/devices/platform/tct_hammer-beeper.0/input\:input1/beep
a tone will be generated for the length set in the duration file. to see what the current value is do:
cat /sys/devices/platform/tct_hammer-beeper.0/input\:input1/duration
the duration is measured in .01 seconds, i.e. a value of 100 is 1 second. if the value of duration is set for zero, the tone will be generated continuously until a zero value is echo'd to the beep entry:
echo 0 > /sys/devices/platform/tct_hammer-beeper.0/input\:input1/duration echo 4096 > /sys/devices/platform/tct_hammer-beeper.0/input\:input1/beep (tone generated) echo 0 > /sys/devices/platform/tct_hammer-beeper.0/input\:input1/beep (tone stops)