Difference between revisions of "Hammer How to Console"

From eLinux.org
Jump to: navigation, search
Line 1: Line 1:
the [[Hammer_Board]] console is on uart0 with the [[APEX]] [[Bootloaders|bootloader]] defaulting to the baud rate of 115200,N,8,1.
+
the [[Hammer_Board]] console is on uart0 with the [[APEX]] [[Bootloaders|bootloader]] defaulting to the baud rate of 115200,N,8,1. Under Linux you can use [[minicom]] and under Microsoft Windows you can use Hyperterm. for those not familiar with serial communications under Linux you can read the [http://www.icewalkers.com/Linux/Howto/Serial-HOWTO.html Serial Howto].
 +
 
  
 
if you are not using the [[Hammer_Board_Carrier]] you can use a minimal rs-232 configuration using a [[RS232_Level_Shifter]].
 
if you are not using the [[Hammer_Board_Carrier]] you can use a minimal rs-232 configuration using a [[RS232_Level_Shifter]].

Revision as of 01:56, 13 September 2007

the Hammer_Board console is on uart0 with the APEX bootloader defaulting to the baud rate of 115200,N,8,1. Under Linux you can use minicom and under Microsoft Windows you can use Hyperterm. for those not familiar with serial communications under Linux you can read the Serial Howto.


if you are not using the Hammer_Board_Carrier you can use a minimal rs-232 configuration using a RS232_Level_Shifter.

Hammer-min.jpg