Hammer How to Console - Revision history

Peter Huewe: changed links

2010-05-18T01:17:26Z

changed links

Prpplague at 02:00, 13 September 2007

2007-09-13T02:00:17Z

Prpplague at 01:58, 13 September 2007

2007-09-13T01:58:08Z

Prpplague at 01:56, 13 September 2007

2007-09-13T01:56:46Z

Prpplague at 01:34, 13 September 2007

2007-09-13T01:34:44Z

Prpplague at 00:31, 13 September 2007

2007-09-13T00:31:08Z

Prpplague at 00:21, 13 September 2007

2007-09-13T00:21:01Z

New page

the Hammer_Board console is on uart0 with the Apex bootloader defaulting to the baud rate of 115200,N,8,1

[[Category:TCT-Hammer]]
[[Category:TinCanTools]]

@@ Line 1: / Line 1: @@
-the [[Hammer_Board]] console is on uart0 with the [[APEX]] ( the [[Bootloaders|bootloader]] that ships with the [[Hammer_Board]] )defaulting to the baud rate of 115200,N,8,1. Under Linux you can use [[minicom]] and under Microsoft Windows you can use Hyperterm. for those not familiar with serial communications under Linux you can read the [http://www.icewalkers.com/Linux/Howto/Serial-HOWTO.html Serial Howto].
+The [[Hammer Board]] console is on uart0 with the [[APEX]] ( the [[bootloader]] that ships with the [[Hammer Board]]) defaulting to the baud rate of 115200,N,8,1. Under Linux you can use [[minicom]] and under Microsoft Windows you can use Hyperterm. For those not familiar with serial communications under Linux you can read the [http://www.icewalkers.com/Linux/Howto/Serial-HOWTO.html Serial Howto].
+If you are not using the [[Hammer Board Carrier]] you can use a minimal rs-232 configuration using a [[RS232 Level Shifter]].
-if you are not using the [[Hammer_Board_Carrier]] you can use a minimal rs-232 configuration using a [[RS232_Level_Shifter]].
 [[Image:hammer-min.jpg]]

← Older revision		Revision as of 02:00, 13 September 2007
Line 1:		Line 1:
−	the [[Hammer_Board]] console is on uart0 with the [[APEX]] (~~main~~ [[Bootloaders\|bootloader]])defaulting to the baud rate of 115200,N,8,1. Under Linux you can use [[minicom]] and under Microsoft Windows you can use Hyperterm. for those not familiar with serial communications under Linux you can read the [http://www.icewalkers.com/Linux/Howto/Serial-HOWTO.html Serial Howto].	+	the [[Hammer_Board]] console is on uart0 with the [[APEX]] ( the [[Bootloaders\|bootloader]] that ships with the [[Hammer_Board]] )defaulting to the baud rate of 115200,N,8,1. Under Linux you can use [[minicom]] and under Microsoft Windows you can use Hyperterm. for those not familiar with serial communications under Linux you can read the [http://www.icewalkers.com/Linux/Howto/Serial-HOWTO.html Serial Howto].

← Older revision		Revision as of 01:58, 13 September 2007
Line 1:		Line 1:
−	the [[Hammer_Board]] console is on uart0 with the [[APEX]] [[Bootloaders\|bootloader]] defaulting to the baud rate of 115200,N,8,1. Under Linux you can use [[minicom]] and under Microsoft Windows you can use Hyperterm. for those not familiar with serial communications under Linux you can read the [http://www.icewalkers.com/Linux/Howto/Serial-HOWTO.html Serial Howto].	+	the [[Hammer_Board]] console is on uart0 with the [[APEX]] (main [[Bootloaders\|bootloader]])defaulting to the baud rate of 115200,N,8,1. Under Linux you can use [[minicom]] and under Microsoft Windows you can use Hyperterm. for those not familiar with serial communications under Linux you can read the [http://www.icewalkers.com/Linux/Howto/Serial-HOWTO.html Serial Howto].

← Older revision		Revision as of 01:56, 13 September 2007
Line 1:		Line 1:
−	the [[Hammer_Board]] console is on uart0 with the [[APEX]] [[Bootloaders\|bootloader]] defaulting to the baud rate of 115200,N,8,1.	+	the [[Hammer_Board]] console is on uart0 with the [[APEX]] [[Bootloaders\|bootloader]] defaulting to the baud rate of 115200,N,8,1. Under Linux you can use [[minicom]] and under Microsoft Windows you can use Hyperterm. for those not familiar with serial communications under Linux you can read the [http://www.icewalkers.com/Linux/Howto/Serial-HOWTO.html Serial Howto].
		+

	if you are not using the [[Hammer_Board_Carrier]] you can use a minimal rs-232 configuration using a [[RS232_Level_Shifter]].		if you are not using the [[Hammer_Board_Carrier]] you can use a minimal rs-232 configuration using a [[RS232_Level_Shifter]].

@@ Line 1: / Line 1: @@
-the Hammer_Board console is on uart0 with the [[APEX]] [[Bootloaders|bootloader]] defaulting to the baud rate of 115200,N,8,1
+the [[Hammer_Board]] console is on uart0 with the [[APEX]] [[Bootloaders|bootloader]] defaulting to the baud rate of 115200,N,8,1.
 [[Category:TCT-Hammer]]
 [[Category:TinCanTools]]