Hammer How to Enc28j60 - Revision history

Drfenning at 09:25, 11 July 2010

2010-07-11T09:25:38Z

2010-07-11T09:24:53Z

notes for newer board revs

2010-05-18T01:07:04Z

changed link

2010-01-28T01:27:39Z

2010-01-28T01:27:23Z

Removed link to deleted page.

2007-09-13T15:51:18Z

2007-09-13T00:37:29Z

2007-09-13T00:21:01Z

2007-09-13T00:01:41Z

2007-09-13T00:01:17Z

@@ Line 11: / Line 11: @@
 done the Hammer_How_to_Switching_5V_Regulator. (if it existed, that would be a link)
-** Newer boards are supplied with a 5V wall wart capable of 1A (output drops to 4.8V) the onboard 3.3V regulator on the carrier is capable of about 500mA of its 800mA manuf rating because of heatsinking. THE 3.3V OUTPUT OF THE HAMMER IS ONLY RATED FOR 50mA!!!
+\*\* Newer boards are supplied with a 5V wall wart capable of 1A (output drops to 4.8V) the onboard 3.3V regulator on the carrier is capable of about 500mA of its 800mA manuf rating because of heatsinking. THE 3.3V OUTPUT OF THE HAMMER IS ONLY RATED FOR 50mA!!!
 Wire the Olimex [[Enc28j60]] board to the [[Hammer_Board_Carrier|Hammer Carrier]] pins as follows:
@@ Line 73: / Line 73: @@
 |}
-* WATCH VERSION, on newer board revs, this is NOT +3.3V!!!!
+\* WATCH VERSION, on newer board revs, this is NOT +3.3V!!!!
 Also make sure that your 5V main power supply can supply the Hammer as well as the ENC28J60-H.

@@ Line 8: / Line 8: @@
 Next we will be soldering it on to the [[Hammer_Board_Carrier|Hammer Carrier]]
-We will use the 3.3V regulator of the [[Hammer_Board_Carrier|Hammer Carrier]], but you already need to have
+We will use the 3.3V regulator of the [[Hammer_Board_Carrier|Hammer Carrier]], but you already need ** to have
-done the Hammer_How_to_Switching_5V_Regulator.
+done the Hammer_How_to_Switching_5V_Regulator. (if it existed, that would be a link)
 Wire the Olimex [[Enc28j60]] board to the [[Hammer_Board_Carrier|Hammer Carrier]] pins as follows:
@@ Line 67: / Line 68: @@
 | Vdd
 | 10
-| TP9
+| TP9 *
 | +3.3V
 |-
 |}
 Also make sure that your 5V main power supply can supply the Hammer as well as the ENC28J60-H.

@@ Line 6: / Line 6: @@
 *[http://microcontrollershop.com/product_info.php?cPath=98&products_id=1390 uC Pro's]
-Next we will be soldering it on to the [[Hammer_Carrier]]
+Next we will be soldering it on to the [[Hammer_Board_Carrier|Hammer Carrier]]
-We will use the 3.3V regulator of the [[Hammer_Carrier]], but you already need to have
+We will use the 3.3V regulator of the [[Hammer_Board_Carrier|Hammer Carrier]], but you already need to have
 done the Hammer_How_to_Switching_5V_Regulator.
-Wire the Olimex [[Enc28j60]] board to the [[Hammer_Carrier]] pins as follows:
+Wire the Olimex [[Enc28j60]] board to the [[Hammer_Board_Carrier|Hammer Carrier]] pins as follows:
 {| border="1" cellspacing="0" cellpadding="5" align="center"

← Older revision		Revision as of 01:27, 28 January 2010
Line 9:		Line 9:

	We will use the 3.3V regulator of the [[Hammer_Carrier]], but you already need to have		We will use the 3.3V regulator of the [[Hammer_Carrier]], but you already need to have
−	done the ~~Hammer_How_to_Swtching_5V_Regulator~~.	+	done the Hammer_How_to_Switching_5V_Regulator.

← Older revision		Revision as of 01:27, 28 January 2010
Line 9:		Line 9:

	We will use the 3.3V regulator of the [[Hammer_Carrier]], but you already need to have		We will use the 3.3V regulator of the [[Hammer_Carrier]], but you already need to have
−	done the [[Hammer_How_to_Swtching_5V_Regulator]]	+	done the Hammer_How_to_Swtching_5V_Regulator.

@@ Line 86: / Line 86: @@
   The Good  Kernel SPI API
     The Bad  The 2.4 driver
-      The Ugly  The current 2.6 "driver"
+      The Ugly  The current 2.6 "driver" included in the kernel patch at [[Hammer_Board_Software]]
-       [[Media:enc28j60.c.diff|enc28j60.c.diff]] [[Media:enc28j60.h.diff|enc28j60.h.diff]] [[Media:Kconfig.diff|Kconfig.diff]] [[Media:Makefile.diff|Makefile.diff]] [[Media:map.h.diff|map.h.diff]] [[Media:clock.c.diff|clock.c.diff]]
-       [[Media:mach-tct_hammer.c.diff|mach-tct_hammer.c.diff]]
-−
 The driver may either be compiled as a module, or as a part of the kernel.

← Older revision		Revision as of 00:21, 13 September 2007
Line 76:		Line 76:

	[[Image:Enc28j60.jpg]]		[[Image:Enc28j60.jpg]]
		+
		+	I used a socket strip that keeps the board about 1/2 inch above the Hammer_Carrier prototype area. This may be important because the PIC chip on the ENC28j60 gets quite warm.
		+

	[[Image:Enc28j60_wireing.jpg]]		[[Image:Enc28j60_wireing.jpg]]

← Older revision		Revision as of 00:01, 13 September 2007
Line 9:		Line 9:

	We will use the 3.3V regulator of the [[Hammer_Carrier]], but you already need to have		We will use the 3.3V regulator of the [[Hammer_Carrier]], but you already need to have
−	done the [[~~Hammer How_to_Swtching_5V_Regulator~~]]	+	done the [[Hammer_How_to_Swtching_5V_Regulator]]