Hammer How to build Kernel

From eLinux.org
Revision as of 02:21, 10 January 2008 by Robotguy (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Here is how to build a custom kernel:

NOTE: If you are installing a custom rootfs, you may have to increase the size of the space in flash to hold the new rootfs image. You do this by editing the linux-2.6.22/arch/arm/mach-s3c2410/mach-tct_hammer.c file. Find the .size string and change the value to be a little larger than your rootfs image is. This value is in hex, so you will have to do a conversion to get the right value.

tar xzf linux-2.6.22.tar.gz
gunzip -c Hammer-linux-2.6.22-09122007.diff.gz | patch -p0
cd linux-2.6.22
cp hammer-config .config
make oldconfig
make zImage

The kernel can be found in arch/arm/boot/zImage