Hammer How to buildroot

From eLinux.org
Revision as of 17:03, 12 September 2007 by Prpplague (talk | contribs)
Jump to: navigation, search

1) buildroot needs hammer-config copied to .config

2) if you dont have makeinfo installed need to patch /buildroot/toolchain_build_arm/binutils-2.17.50.0.17/missing to comment out line 302 "test -f $file || exit 1"

3) kernel is compiled outside of buildroot

4) copy hammer-config to .config

5) edit Makefile to set the cross compiler path properly

6) make oldconfig

7) make zImage

7a) untill dave adds buzzer-gpio.h need to comment out references to the buzzer platform device in arch/arm/march-2c32410/mach-tct_hammer.c

7b) dave added it in the latest version of the hammer patch for 2.6.22 so disregard 7a).

8) in apex "xr 0x30008000" then send the zImage (arch/arm/boot/zImage) via xmodem

8a) ubuntu 6.06 LTS needs lrzsz installed for xmodem etc. to work in minicom.

9) in apex "boot"

10) cat /proc/version ==> Linux version 2.6.22 (kenm@kenm-desktop) (gcc version 4.1.2) #1 Sat Sep 1 12:50:36 MDT 2007

11) now that you have a working kernel, you may want to configure it for networking, see How_to_Networking


catergory:TCT-Hammer