Difference between revisions of "Hammer Kit"

From eLinux.org
Jump to: navigation, search
 
Line 11: Line 11:
 
     * JTAG ribbon cable (14 pin - 2 x 7, length = 8 inches)
 
     * JTAG ribbon cable (14 pin - 2 x 7, length = 8 inches)
 
     * Hammer Kit CD – The CD includes source code and binaries for the bootloader, Linux 2.6 kernel, and a uClibc/Busybox based root file system. Also included is OpenOCD for Linux, board schematics, and application notes.
 
     * Hammer Kit CD – The CD includes source code and binaries for the bootloader, Linux 2.6 kernel, and a uClibc/Busybox based root file system. Also included is OpenOCD for Linux, board schematics, and application notes.
 +
 +
[[Category:TCT-Hammer]]
 +
[[Category:TinCanTools]]

Revision as of 04:17, 4 June 2008

The Hammer Kit includes everything you need to start developing with Linux on the 40-pin ARM9 Hammer CPU board.

The Hammer Kit contains one each of the following items:

   * Hammer: Samsung S3C2410A ARM9 CPU board in a 40-pin DIP package
   * Hammer Carrier: prototyping board designed for use with the Hammer CPU board
   * Flyswatter: USB based JTAG programmer for the Hammer CPU board
   * 5V1A Power Supply: 5V power supply for the Hammer Carrier board
   * USB Cable A to B: USB cable for the Flyswatter
   * RS232 Serial Cable – serial cable to connect the Hammer Carrier to a PC/terminal 
   * JTAG ribbon cable (14 pin - 2 x 7, length = 8 inches)
   * Hammer Kit CD – The CD includes source code and binaries for the bootloader, Linux 2.6 kernel, and a uClibc/Busybox based root file system. Also included is OpenOCD for Linux, board schematics, and application notes.