Hammer-RDP stands for Hammer Robotics Development Platform. This is a new carrier board for Hammer being developed by TinCanTools for the Robotics, Process Control, and general interfacing and hobbiest market.
* Small size - just 3" x 3", ideal for space constrained applications. * Stackable add on boards can be created for custom applications such as process control, home automation, robotics, etc. * Three pin headers for all GPIO connections, allowing easy interfacing to sensors, servos, and other devices using this pin arrangement. * Jumperable dual voltage selection for all GPIO connections - 3.3V or 5V. Pins can be jumpered for either voltage in sets of four. * Dual voltage (3.3V and 5V) I2C bus. * 8 channel, 12 bit analog inputs via SPI * Most Hammer signals, including I2C, are available on the stacking connector.
Possible add on boards you might create for the Hammer-RDP:
* Prototyping Board * Single USB Host 4 port Hub with on board Flyswatter JTAG * Sound Board with additional analog inputs and GPIOs * Your application specific interface board
The only limitation is your imagination!