Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

Difference between revisions of "Hammer WiFi"

From eLinux.org
Jump to: navigation, search
(1) [http://www.edimax.com/en/produce_detail.php?pd_id=3&pl1_id=1&pl2_id=44 '''Edimax EW-7318Ug'''])
Line 5: Line 5:
 
For this to work properly, you need at least kernel 2.6.25-rc8 with the Hammer Patch. This adapter uses the [http://www.ralinktech.com Ralink] RT73 chipset, so the rt73usb driver must be enabled in your kernel.
 
For this to work properly, you need at least kernel 2.6.25-rc8 with the Hammer Patch. This adapter uses the [http://www.ralinktech.com Ralink] RT73 chipset, so the rt73usb driver must be enabled in your kernel.
  
Here is a known working configuration for this adapter. These lines are added to your '''inittab''' file.
+
Here is a known working configuration for this adapter. These lines are added to your '''inittab''' file. You might be able to use this configuration for other cards by making substitutions as shown.
  
 
  null::sysinit:/sbin/modprobe mac80211
 
  null::sysinit:/sbin/modprobe mac80211
 
  null::sysinit:/sbin/modprobe cfg80211
 
  null::sysinit:/sbin/modprobe cfg80211
  null::sysinit:/sbin/modprobe rt73usb
+
  null::sysinit:/sbin/modprobe rt73usb (Replace this with the module for your WiFi board)
 
  null::sysinit:/bin/sleep 5
 
  null::sysinit:/bin/sleep 5
 
  null::sysinit:/sbin/ifconfig wlan0 <IP address> netmask 255.255.255.0 broadcast <Broadcast address> up
 
  null::sysinit:/sbin/ifconfig wlan0 <IP address> netmask 255.255.255.0 broadcast <Broadcast address> up
  null::sysinit:/sbin/iwconfig wlan0 essid thedynaplexnetwork
+
  null::sysinit:/sbin/iwconfig wlan0 essid thedynaplexnetwork (Replace with your network's essid)
 
  null::sysinit:/sbin/iwconfig wlan0 channel 11
 
  null::sysinit:/sbin/iwconfig wlan0 channel 11
 
  null::sysinit:/sbin/iwconfig wlan0 mode managed
 
  null::sysinit:/sbin/iwconfig wlan0 mode managed
 
  null::sysinit:/sbin/iwconfig wlan0 enc on
 
  null::sysinit:/sbin/iwconfig wlan0 enc on
  null::sysinit:/sbin/iwconfig wlan0 key <your wep key here>
+
  null::sysinit:/sbin/iwconfig wlan0 key <Put your WEP key here>
  
 
[[Category:TCT-Hammer]]
 
[[Category:TCT-Hammer]]
 
[[Category:TinCanTools]]
 
[[Category:TinCanTools]]

Revision as of 13:01, 2 May 2008

Here are the WiFi adapters we know work with the Hammer Board:

1) Edimax EW-7318Ug

For this to work properly, you need at least kernel 2.6.25-rc8 with the Hammer Patch. This adapter uses the Ralink RT73 chipset, so the rt73usb driver must be enabled in your kernel.

Here is a known working configuration for this adapter. These lines are added to your inittab file. You might be able to use this configuration for other cards by making substitutions as shown.

null::sysinit:/sbin/modprobe mac80211
null::sysinit:/sbin/modprobe cfg80211
null::sysinit:/sbin/modprobe rt73usb (Replace this with the module for your WiFi board)
null::sysinit:/bin/sleep 5
null::sysinit:/sbin/ifconfig wlan0 <IP address> netmask 255.255.255.0 broadcast <Broadcast address> up
null::sysinit:/sbin/iwconfig wlan0 essid thedynaplexnetwork (Replace with your network's essid)
null::sysinit:/sbin/iwconfig wlan0 channel 11
null::sysinit:/sbin/iwconfig wlan0 mode managed
null::sysinit:/sbin/iwconfig wlan0 enc on
null::sysinit:/sbin/iwconfig wlan0 key <Put your WEP key here>