Linux Programmer’s Guide
- 1 Prerequitive
- 2 Introduction to Toolchain
- 3 Native Toolchain & Compilation
- 4 Cross Toolchain & Compilation
This guide assume ,basic knowlege of Kernel(uImage) and RootFS Please go through Beginners guide ,if you arent aware of this term
Introduction to Toolchain
Toolchain are Chain or set of programming tools for building an apps , it could include following :
- Editor for writing program
- Linker loader
- Binutils etc.
Native toolchains are tools which makes binaries for the environment where toolchain itself is being run.i.e Host and target are same platform. This type of Compilation process is called Native compilation .Meaning that the program is compiled on same platform where it has to be run. Similar to normal PC based program ,they are compiled and run on same machine.
It is much easier to program using this method as it doesn’t involve any Makefile changes.
Earlier embedded devices had very less memory and space and also limited supports of Input-output peripherals, hence Native compilation was not possible or very difficult. But with the advent of powerful embedded ARM processor its now possible to make application on the platform itself. Same can be done in Hawk board too. But still compilation will be slower as compare to that in x86 machine.
e.g. Normal GCC Toolchain in x86 Linux machine is a Native toolchain.
Toolchain which are used to compile the application that will run of different machine(architecture) .This is usually used for embedded apps (e.g ARM programming) You program in x86 environment and run in ARM Board. This type of compiling is called cross compiling
Since native compilation is either not possible or very slow ,Cross compilation present a better alternative for faster development .Only drawback is to properly set build environment and Makefiles.
It similar to native toolchain,but infact toolchain run in virtualised environment on Host.Simple example is QEMU -ARM Running on X86 Linux & you are developing application on this Virtual environment.
This has advantage of both Native and Cross compilation.Speed of cross compilation & Ease of Native development.
Various solution exists, One is scratchbox ,another is ChrootEABI feature in Ubuntu.
Native Toolchain & Compilation
There are various ways solution to compile the application natively on hawkboard.
1. Using Ubuntu Rootfs
Rootstock script in Ubuntu provides a easy way of making Root Filesystem give gcc,vi,g++ as seed parameter to rootstock command and you will have a GNU Toolchain inside the rootfs.
Then write/compile/run as you do for x86 program.
This needs rootstock to installed on Ubuntu (9.10)
apt-get install rootstock
sudo rootstock --fqdn MyRootFS --login <user> --password <password> --imagesize 2G --dist jaunty --serial ttyS2 --seed ubuntu-minimal,gcc,vim,g++,openssh,subversion,apt
<user> is user name <password> is password that will be required once this rootfs is booted on hawkboard
imagesize is max size allocated to rootfs.you can keep it same as ur USB Drive /SD card .
Seed parameter tells which packages to be included in rootfs.include atleast gcc,vim (any editor),build-essential packages.
This will take couple of hours to completely download packages you have mentioned and to make a rootfs.
After completion of command it will create some file such as
This is compressed rootfilesytem extract it on a SD card or NFS Folder and boot using one of the method described in beginners/guide
Set proper user group and rights of File
sudo tar xfp armel-rootfs-**********.tgz chown -R root.root * chmod -R 777 * chmod 440 etc/sudoers chown root:root usr/bin/sudo chmod 4111 usr/bin/sudo
2.Angstrom Root FS
Select Hawkboard from the List http://www.angstrom-distribution.org/narcissus/
Angstrom Distribution provides following dev packages
- Mono (C#, .NET)
- Busybox replacements
Select atleast Toolchain to get GCC.
3. Fedora ARM RootFS
Fedora like ubuntu's rootstock provide a script rfsbuild that generates rootfs you can include gcc in package list to include it as native toolchain.
4. Rootfs without GCC
Even though you havent selected gcc as packages in any of the above distribution you can use the native gcc toolchain from Impactlinux. Download from here
Extract and properly export the path of native-compiler-armv5l/bin and you can compile the apps on hawkboard. use [Static linking] instead of dynamic linking .
gcc hello-world.c -static
Cross Toolchain & Compilation
There are Lots of readily available tool chains that you can extract and start compiling apps on x86 architecture and finally load and run on hawkboard.
This is the most common toolchain used for OMAP.Codesourcery provides both a free version and licensed release toolchain. Free version can be downloaded from the link below
3.Cross Toolchain by Fedora Arm Project
If you are using a Fedora as host environment than easiest way is to use Fedora ARM Toolchain. Fedora provides arm toolchain packages for i386 and x86_64 that are built from the same sources as the Fedora native toolchain packages (binutils, gcc, gdb, glibc.) To install this toolchain on your Fedora machine, do:
# cd /etc/yum.repos.d/ # wget http://fedora-arm.wantstofly.org/cross/cross.repo # yum install armv5tel-redhat-linux-gnueabi-gcc
This will install everything necessary to run the C compiler and cross-build ARM libraries and binaries that are entirely binary compatible with the native Fedora/ARM libraries and binaries.
Cross-compiling ARM userland binaries
To cross-compile the canonical Hello World example for ARM, do:
$ armv5tel-redhat-linux-gnueabi-gcc -Wall -o hello hello.c
Cross-compiling ARM kernels
You can also use the cross-toolchain to cross-build an ARM Linux kernel, by changing these two lines in the top-level Makefile:
ARCH ?= $(SUBARCH) CROSS_COMPILE ?=
ARCH ?= arm CROSS_COMPILE ?= armv5tel-redhat-linux-gnueabi-
and then building your kernel as usual.