Difference between revisions of "HawkboardFAQ"

From eLinux.org
Jump to: navigation, search
(Autoboot Hawkboard)
Line 11: Line 11:
 
'''A''': Due to color space issues it is a little bit tricky at the moment. Not much software supports it out of the box. You can find test procedure [[Testing Video Input of Hawkboard | here]]
 
'''A''': Due to color space issues it is a little bit tricky at the moment. Not much software supports it out of the box. You can find test procedure [[Testing Video Input of Hawkboard | here]]
  
==Autoboot Hawkboard==
+
==U-Boot==
 
'''Q''':How to Do i autoboot Hawkboard with my RootFS on USB Drive.?
 
'''Q''':How to Do i autoboot Hawkboard with my RootFS on USB Drive.?
  

Revision as of 07:03, 23 May 2010


Camera Interface

Q: How can I use/test camera interface of Hawkboard?

A: Due to color space issues it is a little bit tricky at the moment. Not much software supports it out of the box. You can find test procedure here

U-Boot

Q:How to Do i autoboot Hawkboard with my RootFS on USB Drive.?

A:To Autoboot hawkboard kernel must reside on NAND & follow these

 setenv serverip 192.168.0.100
 setenv ipaddr 192.168.0.150 
 tftpboot 0xc0700000 u-boot_nand_ais_v1.bin
 nand erase
 nand write.e 0xc0700000 0x20000 0x70000
 tftp c0700000 uImage
 nand write.e 0xc0700000 0x200000 0x200000
 setenv bootargs console=ttyS2,115200n8 console=tty1 noinitrd root=/dev/sda rootwait rw init=/sbin/init
 setenv bootcmd "setenv console=ttyS2,115200n8 console=tty1 noinitrd root=/dev/sda1 rootwait rw init=/sbin/init;nand read.e 0xc0700000 0x200000 0x200000;bootm 0xc0700000"
 saveenv

Ubuntu Rootfs

Q:How to Do i installed new packages in ubuntu jaunty rootfs?

A:If you have made the rootfs using rootstock with "apt" as one of Seed paramter than you can use "apt-get install <package_name> to install required package.


Booting Errors

Q:I am getting "Kernel panic - not syncing: VFS: Unable to mount root fs ..." error how to resolve this?

A:Kernel panic occurs when kernel is not able to find rootfs(init program ),either the bootargs is not correct or source of rootfs is not available.

DSP

Q:How do i start with DSP Programming on Hawkboard?

A: