From eLinux.org
Revision as of 13:43, 23 May 2010 by Alokprasad (Talk | contribs)

Jump to: navigation, search

Camera Interface

Q: How can I use/test camera interface of Hawkboard?

A: Due to color space issues it is a little bit tricky at the moment. Not much software supports it out of the box. You can find test procedure here


Q:I am not getting U-BOOT Prompt or How do i recovery U-Boot ?

A:Please see recovery guide to Reflash uboot on Hawkboard Here

Q:How to Do i autoboot Hawkboard with my RootFS on USB Drive.?

A:To Autoboot hawkboard kernel must reside on NAND & follow these

 setenv serverip
 setenv ipaddr 
 tftpboot 0xc0700000 u-boot_nand_ais_v1.bin
 nand erase
 nand write.e 0xc0700000 0x20000 0x70000
 tftp c0700000 uImage
 nand write.e 0xc0700000 0x200000 0x200000
 setenv bootargs console=ttyS2,115200n8 console=tty1 noinitrd root=/dev/sda rootwait rw init=/sbin/init
 setenv bootcmd "setenv console=ttyS2,115200n8 console=tty1 noinitrd root=/dev/sda1 rootwait rw init=/sbin/init;nand read.e 0xc0700000 0x200000 0x200000;bootm 0xc0700000"

Ubuntu Rootfs

Q:How to Do i installed new packages in ubuntu jaunty rootfs?

A:If you have made the rootfs using rootstock with "apt" as one of Seed paramter than you can use "apt-get install <package_name> to install required package.

Booting Errors

Q:I am getting "Kernel panic - not syncing: VFS: Unable to mount root fs ..." error how to resolve this?

A:Kernel panic occurs when kernel is not able to find rootfs(init program ),either the bootargs is not correct or source of rootfs is not available.


Q:How do i start with DSP Programming on Hawkboard?

A:Read Thread

  1. http://groups.google.com/group/hawkboard/browse_thread/thread/3534c1590940688c/f7118c18635d8275
  2. http://groups.google.com/group/hawkboard/browse_thread/thread/661c1ce0f342b1f8/d4d617831983b78d


Q:Does Hawkboard support SDHC Card?

A:Yes ,it supports SD & SDHC Card.