Impressx:Arduino Shield Adapter

Revision as of 12:37, 10 February 2014 by Impressx (Talk | contribs) (Arduino Shields with BeagleBone)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


BeagleBone LCD Cape

The Shield I/O Cape provides the ability to mount (almost) every Arduino Shield on the BeagleBone Black, no matter if it’s using 3.3V or 5V logic levels. Changing from 3.3V to 5V is done by software. It can also be ordered with an onboard 16 pin I/O expander which is accessible over the I2C bus.


Electrical Specifications

Power Supply 3.3V from BeagleBone Black and 5V from external Vcc Connector on BeagleBone Black
Indication 2 orange LED indicating 3.3V and 5V supply
Connectors 14 digital I/O
6 analog inputs
1 I2C bus
optionally: 16 pin I/O expander

Mechanical Specifications

Size 86.5mm x 58.5mm
Layers 2
PCB Thickness 1.6mm
RoHS Compliant Yes


ShieldIO Pin
EEPROM Suport Yes
Board Name ShieldIO
Version A1
Manufacturer impressx
Part Number ShieldIO
Pins Used 33 pins


Open Source No
System Reference Manual Not yet ready
Schematics No
PCB Files No
Gerber Files No
Bills of Materials No


Manufacturer's Link

For more information about this cape, please visit Impressx

To go back to the cape list, please click BeagleBone Capes