Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

Difference between revisions of "InnoTab 3.5mm Uart"

From eLinux.org
Jump to: navigation, search
(Outside Case)
(Connected)
Line 40: Line 40:
  
 
= Connected =
 
= Connected =
[[File:innotab_case_cable-connected.jpg|200px]]
+
[[File:innotab_case_cable-connected-a.jpg|200px]]
 +
 
 +
[[File:innotab_case_cable-connected-b.jpg|200px]]

Revision as of 03:35, 27 May 2012

Introduction

This procedure has been documented in a way that someone who has very little experience with soldering or board modification should be able to accomplish the mod. In addition the parts chosen have been selected due to the availability, ease of use, and cost.

Note: If you use a 2.5mm stereo socket instead of the 3.5mm one, you can use the many "Motorola T191" and compatible cables as they are used with OsmocomBB and a varity of other Osmocom projects. The cables are also often available cheaper than the 3.5mm cable from Digikey linked below.

Parts

Audio-jack.jpg

NOTE: Sparkfun.com has a good selection of compatible parts

PCB Connection

200px

200px

Cable Sections

200px

200px

200px

Inside Case

Innotab case cage.jpg

Innotab case inside-a.jpg

Innotab case inside-b.jpg

Innotab case inside-c.jpg

Outside Case

Innotab case outside-a.jpg

Innotab case outside-b.jpg

Connected

Innotab case cable-connected-a.jpg

200px