Difference between revisions of "InnoTab 3.5mm Uart"

From eLinux.org
Jump to: navigation, search
(Created page with "= Introduction = This procedure has been documented in a way that someone who has very little experience with soldering or board modification should be able to accomplish the mo...")
 
Line 12: Line 12:
  
 
NOTE: [http://www.sparkfun.com/products/11154 Sparkfun.com] has a good selection of compatible parts
 
NOTE: [http://www.sparkfun.com/products/11154 Sparkfun.com] has a good selection of compatible parts
 
= Inside Case =
 
[[File:innotab_case_cage.jpg|200px]]
 
 
[[File:innotab_case_inside-a.jpg|200px]]
 
 
[[File:innotab_case_inside-b.jpg|200px]]
 
  
 
= PCB Connection =
 
= PCB Connection =
Line 31: Line 24:
  
 
[[File:innotab_case_cable-c.jpg|200px]]
 
[[File:innotab_case_cable-c.jpg|200px]]
 +
 +
= Inside Case =
 +
[[File:innotab_case_cage.jpg|200px]]
 +
 +
[[File:innotab_case_inside-a.jpg|200px]]
 +
 +
[[File:innotab_case_inside-b.jpg|200px]]
  
 
= Outside Case =
 
= Outside Case =

Revision as of 20:26, 26 May 2012

Introduction

This procedure has been documented in a way that someone who has very little experience with soldering or board modification should be able to accomplish the mod. In addition the parts chosen have been selected due to the availability, ease of use, and cost.

Note: If you use a 2.5mm stereo socket instead of the 3.5mm one, you can use the many "Motorola T191" and compatible cables as they are used with OsmocomBB and a varity of other Osmocom projects. The cables are also often available cheaper than the 3.5mm cable from Digikey linked below.

Parts

Audio-jack.jpg

NOTE: Sparkfun.com has a good selection of compatible parts

PCB Connection

200px

200px

Cable Sections

200px

200px

200px

Inside Case

Innotab case cage.jpg

Innotab case inside-a.jpg

Innotab case inside-b.jpg

Outside Case

Innotab case outside-a.jpg

Innotab case outside-b.jpg

200px


Connected

200px