Difference between revisions of "J1939"

From eLinux.org
Jump to: navigation, search
(SAE J1939 in Linux)
(Build: update examples to github sources)
(One intermediate revision by the same user not shown)
Line 20: Line 20:
 
== Sources ==
 
== Sources ==
 
Support for SAE J1939 in Linux consists of 3 parts:
 
Support for SAE J1939 in Linux consists of 3 parts:
* [http://gitorious.org/~kurt-vd/linux-can-j1939 j1939 linux kernel]
+
* [http://github.com/kurt-vd/linux j1939 linux kernel]
* [http://gitorious.org/~kurt-vd/can-j1939-utils j1939 can-utils]
+
* [http://github.com/kurt-vd/can-utils j1939 can-utils]
* [http://gitorious.org/~kurt-vd/iproute2-j1939 j1939 iproute2]
+
* [http://github.com/kurt-vd/iproute2 j1939 iproute2]
  
 
You probably want all 3 components to get a J1939 linux node working.
 
You probably want all 3 components to get a J1939 linux node working.
 +
The J1939 specific code resides in dedicated branches.
  
 
The final goal is to have these source trees mainlined.
 
The final goal is to have these source trees mainlined.
 
(The [http://gitorious.org/linux-can/can-j1939-modules j1939 CAN modules] are depreciated)
 
  
 
== Build ==
 
== Build ==
Line 35: Line 34:
 
     $ git clone <yourfavoritelinuxkernel> linux
 
     $ git clone <yourfavoritelinuxkernel> linux
 
     $ cd linux
 
     $ cd linux
     $ git remote add j1939 git://gitorious.org/~kurt-vd/linux-can/linux-can-j1939.git
+
     $ git remote add j1939 git://github.com/kurt-vd/linux
 
     $ git remote update j1939
 
     $ git remote update j1939
 
     $ git merge j1939/j1939-vX.X
 
     $ git merge j1939/j1939-vX.X
Line 44: Line 43:
 
=== Build can-j1939-utils (recommended) ===
 
=== Build can-j1939-utils (recommended) ===
  
     $ git clone git://gitorious.org/~kurt-vd/linux-can/can-j1939-utils.git
+
     $ git clone git://github.com/kurt-vd/can-utils
     $ cd can-j1939-utils
+
     $ cd can-utils
 
     $ make etc.
 
     $ make etc.
  
Line 55: Line 54:
 
=== Build iproute2-j1939 (recommended) ===
 
=== Build iproute2-j1939 (recommended) ===
  
     $ git clone git://gitorious.org/~kurt-vd/linux-can/iproute2-j1939.git
+
     $ git clone git://github.com/kurt-vd/iproute2
 
     $ cd iproute2
 
     $ cd iproute2
 
     $ git checkout j1939-vX.X
 
     $ git checkout j1939-vX.X

Revision as of 03:17, 21 April 2015

SAE J1939 in Linux

overview

See also on Wikipedia.

SAE J1939 defines a higher layer protocol on CAN. It implements a more sophisticated addressing scheme and extends the maximum packet size above 8 bytes. Several derived specifications exists, which differ from the original j1939 on the application level, like MilCAN, NMEA2000 and especially ISO-11783 (ISOBUS). This last one specifies the so-called ETP (Extended Transport Protocol) which is has been included in this implementation. This inclusion results in a maximum packet size of ((2^24)-1)*7 bytes

Specifications

  • SAE J1939-21 : data link layer
  • SAE J1939-81 : network management
  • ISO 11783-6  : Virtual Terminal (Extended Transport Protocol)

Sources

Support for SAE J1939 in Linux consists of 3 parts:

You probably want all 3 components to get a J1939 linux node working. The J1939 specific code resides in dedicated branches.

The final goal is to have these source trees mainlined.

Build

Build the kernel (necessary)

   $ git clone <yourfavoritelinuxkernel> linux
   $ cd linux
   $ git remote add j1939 git://github.com/kurt-vd/linux
   $ git remote update j1939
   $ git merge j1939/j1939-vX.X
   $ make etc.

With j1939-vX.X the branch that matches the closest, but not higher, with your linux version.

Build can-j1939-utils (recommended)

   $ git clone git://github.com/kurt-vd/can-utils
   $ cd can-utils
   $ make etc.

Or you may merge the j1939 changes into any other can-utils version. This should be fairly simple.

If the branch of linux-can-j1939 that you merged into your kernel was for version 3.7 or higher, use the j1939-v6 branch of can-j1939-utils.

Build iproute2-j1939 (recommended)

   $ git clone git://github.com/kurt-vd/iproute2
   $ cd iproute2
   $ git checkout j1939-vX.X
   $ make etc.

With j1939-vX.X the branch that matches the closest, but not higher, with your linux version.

Or you may merge the j1939 changes into any other iproute2 version. This may be a little more complicated.

Getting Started with J1939

First get a can0 bus on your system.

   $ modprobe vcan
   $ ip link add can0 type vcan
   $ ip link set can0 up

Now start j1939.

   $ modprobe can-j1939
   $ ip link set can0 j1939 on

Now you should be able to use can0 as a j1939 CAN device.