JuiceBox Dmesg Comp

From eLinux.org
Revision as of 03:32, 7 March 2007 by RBot (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This was taken from the Discussion Forum posted by greghol:


Linux version 2.4.24-uc0 (gregh@arm7) (gcc version 2.95.3 20010315 (release)5
Processor: Samsung S3C44B0X revision 0
Architecture: S3C44B0X
On node 0 totalpages: 1009
zone(0): 0 pages.
zone(1): 1009 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/rom0
Calibrating delay loop... 29.79 BogoMIPS
Memory: 3MB = 3MB total
Memory: 3200KB available (470K code, 280K data, 32K init)
Dentry cache hash table entries: 512 (order: 0, 4096 bytes)
Inode cache hash table entries: 512 (order: 0, 4096 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 1024 (order: 0, 4096 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Samsung S3C44B0X UART driver version 0.1 <thomas.eschenbacher@sympat.de>
ttyS0 (irq = 3) is a builtin Samsung S3C44B0X UART
Samsung s3c44b0x 4096 color STN driver frame buffer: 0x0C3F1F00
Cirrus Logic CS43L43 Stereo DAC with Headphone Amp
Function keys for Toymaker video player
Power Management for Toymaker video player
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 1 disk images:
0: 100000-1FFFFF [VIRTUAL 100000-1FFFFF] (RO)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (romfs filesystem) readonly.
Shell invoked to run file: /etc/rc
Command: hostname TCE44B0
Command: /bin/expand /etc/ramfs.img /dev/ram0
Can't open expanded file /dev/ram0
pid 8: failed 768
Command: mount -t proc proc /proc
Command: mount -t ext2 /dev/ram0 /var
mount failed: No such device
Command: mkdir /var/config
/var/config: Read-only file system
Command: mkdir /var/tmp
/var/tmp: Read-only file system
Command: mkdir /var/log
/var/log: Read-only file system
Command: mkdir /var/run
/var/run: Read-only file system
Command: mkdir /var/lock
/var/lock: Read-only file system
Command: #dhcpcd eth0 &
Command: #dhcpcd -p -a eth0 &
Command: #ifconfig lo 127.0.0.1
Command: #route add -net 127.0.0.0 netmask 255.255.255.0 lo
Command: #dhcpcd &
Command: #ifconfig eth0 192.168.0.128
Command:
Command: #dhcpcd &
Command: ifconfig eth0 192.168.0.128
No support for INET on this system.
pid 9: failed 256
Command: route add -net 192.0.0.0 netmask 255.0.0.0 eth0
socket: Address family not supported by protocol
pid 10: failed 1792
Command: ifconfig lo 127.0.0.1
No support for INET on this system.
pid 11: failed 256
Command: route add -net 127.0.0.0 netmask 255.255.255.0 lo
socket: Address family not supported by protocol
pid 12: failed 1792
Command:
Execution Finished, Exiting

Sash command shell (version 1.1.1)
/>