JuiceWare Xd Socket

Using an SMC (Smart Media) to xD adapter you can build a Juiceware cartridge with an xD Socket.
Materials: Smart Media to xD adapter (both listed below use the same socket) Froogle is your best bet at this point or your favorite auction site; CP TECH. CP-CK-SX Link Depot XD-SMC Other sources, other types, raw sockets? Juiceware cartridge 30 AWG (wire wrap) wire solder glue - instant adhesive, (Super Glue) Tools: Small Phillips screwdriver Soldering iron with a suitable (small) tip Wide tip for de-soldering the ROM (optional) Utility knife or razor blade Sandpaper or file Wire cutter 30 AWG wire stripper Solder-wick Optional: Multimeter Straight edge Marker Flux pen tape Assumptions: You should have all the following; A Juicebox with JTAG working Ability to write and read a NAND device Experienced with SMT soldering A working toolchain
Procedures: * JuiceWare Xd Materials - Needed Materials * JuiceWare Xd Socket1 - Liberating the socket * JuiceWare Xd Socket2 - Prepping the cartridge * JuiceWare Xd Socket3 - Putting it together * JuiceWare Xd Socket4 - Testing * JuiceWare Xd Socket5 - Troubleshooting