Difference between revisions of "JuiceWare Xd Socket1"

From eLinux.org
Jump to: navigation, search
m (Bot (Edward's framework))
 
 
Line 18: Line 18:
  
 
Back [[JuiceWare Xd Socket]] main menu.
 
Back [[JuiceWare Xd Socket]] main menu.
 +
 +
[[Category:JuiceBox]]

Latest revision as of 09:12, 14 July 2007


First step is to remove the adapter from the package. Then cut away whatever housing that may cover the socket.

Note: Depending on which brand of adapter you have this step may be slightly different. The point is to expose the socket.

02-JB-XD-a.jpg


This type of socket has rear facing pins. Use of this socket requires a different technique from the original Juiceware socket adapter.

Mark just behind the socket for the cut.

04-JB-XD-a.jpg


Score both sides at the mark. Make sure the two cuts line up.

06-JB-XD-a.jpg


Being careful not to put too much force on the socket housing, snap the PCB at the cut.

The rough edges can be cleaned up with sandpaper or a file. To avoid a short be sure to remove any copper "threads" left behind.

07-JB-XD-a.jpg


Next JuiceWare Xd Socket2 - Prepping the cartridge.

Back JuiceWare Xd Socket main menu.