JuiceWare Xd Socket2

From eLinux.org
Revision as of 09:12, 14 July 2007 by Chris (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Remove the three screws holding the cartridge together. With the blade remove the top standoff from the cartridge front half.

08-JB-XD-a.jpg 09-JB-XD-a.jpg


Use sandpaper or a file to make sure the standoff is now flush with the cartridge edge. If you don't have a wide soldering iron tip you can carefully cut the ROM package from the pins then de-solder them one at a time. Cleanup any extra solder with the solder-wick.

10-JB-XD-a.jpg 11-JB-XD-a.jpg


Next JuiceWare Xd Socket3 - Putting it together.

Back JuiceWare Xd Socket - Main menu.