Difference between revisions of "LF-1000"
From eLinux.org
(→Core) |
|||
| Line 7: | Line 7: | ||
== Features == | == Features == | ||
=== Core === | === Core === | ||
| + | *ARM926EJ-S- 393MHz | ||
| + | **16KByte I-Cache | ||
| + | **16KByte D-Cache | ||
| + | |||
* 90 nm Process | * 90 nm Process | ||
* 288pin FBGA | * 288pin FBGA | ||
| Line 14: | Line 18: | ||
* High performance 32bit CPU Core | * High performance 32bit CPU Core | ||
| − | * | + | * Jazelle Java Hardware Accelerator |
| − | + | ||
| − | + | ||
| − | |||
=== Memory === | === Memory === | ||
| Line 26: | Line 27: | ||
** Up to 128MB | ** Up to 128MB | ||
** Peak Memory Bandwidth : 533MByte/sec | ** Peak Memory Bandwidth : 533MByte/sec | ||
| + | |||
| + | *8 Channel DMA | ||
| + | |||
=== Storage === | === Storage === | ||
* Static Bus controller | * Static Bus controller | ||
| Line 33: | Line 37: | ||
* Boot form NAND flash or NOR flash | * Boot form NAND flash or NOR flash | ||
* IDE interface with PIO mode | * IDE interface with PIO mode | ||
| + | |||
| + | *SD/ MMC interface | ||
| + | **Two Channels of SD/MMC | ||
| + | **SD mem Version 2.00 | ||
| + | **SDIO version 1.10 | ||
| + | **MMC version 4.2 | ||
| + | **clock speed up to 52MHz | ||
| + | **PIO and DMA mode data transfer | ||
| + | |||
=== Display Subsystem === | === Display Subsystem === | ||
** Supports screen size up to 1280 * 1024@60Hz | ** Supports screen size up to 1280 * 1024@60Hz | ||
| Line 51: | Line 64: | ||
*** Z-Buffer, Alpha Blending | *** Z-Buffer, Alpha Blending | ||
*** Open GL ES 1.1 support | *** Open GL ES 1.1 support | ||
| + | |||
=== Integrated peripherals === | === Integrated peripherals === | ||
* USB Host/ Device(2.0), I2C, 4Ch UART, SSP/SPI | * USB Host/ Device(2.0), I2C, 4Ch UART, SSP/SPI | ||
| Line 57: | Line 71: | ||
* ADC | * ADC | ||
* PWM | * PWM | ||
| + | *JTAG | ||
| + | |||
=== Power Management === | === Power Management === | ||
*Individual block dynamic power controlller | *Individual block dynamic power controlller | ||
| Line 62: | Line 78: | ||
** Idle | ** Idle | ||
** Stop | ** Stop | ||
| + | |||
=== Operating Temperature === | === Operating Temperature === | ||
* 0℃ ~ 70℃ | * 0℃ ~ 70℃ | ||
Revision as of 00:57, 27 February 2010
Contents |
Summary
Features
Core
- ARM926EJ-S- 393MHz
- 16KByte I-Cache
- 16KByte D-Cache
- 90 nm Process
- 288pin FBGA
- 15mm x 15mm
- 0.65mm pitch
- High performance 32bit CPU Core
- Jazelle Java Hardware Accelerator
Memory
- DDR SDRAM Controller
- 133MHz DDR SDRAM memory x 16bit
- Single DDR memory bank
- Up to 128MB
- Peak Memory Bandwidth : 533MByte/sec
- 8 Channel DMA
Storage
- Static Bus controller
- 16 bit data bus
- Supports 8 bit NAND flash and 8/16 bit SRAM
- Supports SLC/ MLC NAND
- Boot form NAND flash or NOR flash
- IDE interface with PIO mode
- SD/ MMC interface
- Two Channels of SD/MMC
- SD mem Version 2.00
- SDIO version 1.10
- MMC version 4.2
- clock speed up to 52MHz
- PIO and DMA mode data transfer
Display Subsystem
- Supports screen size up to 1280 * 1024@60Hz
- Supports Flat Panel I/F: Color TFT at 16, 18, 24 bit//Pixel, STN-LCD
- Display Layers
- RGB Layer : 2 Layer, 8/16/24bpp Format
- YUV Layer : YUV4:2:0, 2D/Linear Format, Scale Up/Down
- Effects : Color Key, Priority, Alpha Blending(16 Levels)
- Color Control : Brightness, Contrast, Hue, Saturation
- Output Format
- CCIR 601/656, RGB, M-RGB(Multiplexed RGB)
- Supports NTSC/PAL Encoder with Analog DAC
- CVBS Output
- Independent Dual Display Output
- Advanced 3D Graphics
- 3D Performance : 133M Texel/sec, 1.33M Polygon/sec
- 3D Texture Mapping, Lighting, Shading, Fogging
- Z-Buffer, Alpha Blending
- Open GL ES 1.1 support
Integrated peripherals
- USB Host/ Device(2.0), I2C, 4Ch UART, SSP/SPI
- 2Ch SD/MMC, NAND
- I2S
- ADC
- PWM
- JTAG
Power Management
- Individual block dynamic power controlller
- Supports various power down mode
- Idle
- Stop
Operating Temperature
- 0℃ ~ 70℃
Operating System
- Microsoft Windows CE 5.0/6.0
- Linux
