Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

Difference between revisions of "LeapFrog Pollux Platform: DFTPdevice"

From eLinux.org
Jump to: navigation, search
(DFTP Command List)
Line 129: Line 129:
 
Returns: SERIAL="XXXXXXXXXXXXXXXXXXXXX"
 
Returns: SERIAL="XXXXXXXXXXXXXXXXXXXXX"
  
 +
Untested
 +
 +
'''RUN'''
 +
Action: Runs shell script
 +
Next: Send data then 101 EOF
 +
 +
'''GETS SCRIPT_RUNNING'''
  
 
=== Reboot Sequences ===
 
=== Reboot Sequences ===

Revision as of 18:15, 26 January 2012

Work in progress, just jotting down notes currently.

DFTPdevice is an FTP like server that runs on both the Explorer and LeapPad. For these devices, this is what OpenLFConnect connects to them with.

DFTP Device

Connecting.

Open port 5000 send ETH command Open port 5001

When device starts up port 5000 is open, once you make a connection, you need to send the ETH command. Then port 5001 opens up.

5000 is the port you send commands to.

5001 is the port you read the responses from.

DFTP Command List

The command list is fairly undocumented, there is a few listed in the sources, but most will be discovered by other means, like using Wireshark. This is the list so far.

All commands must have a trailing 0x00 attached. In python it would look something like.

socket.send('LIST /path/to\x00')

In OpenLFConnect there is a special command send. It allows you to send any command you like, the 0x00 is appended for you, otherwise its all raw read/write. Obviously STOR and RETR won't work with it, but the rest you can play around with.

remote>send LIST /path/to

Some commands are Surgeon only.

Surgeon Only DFTP Version 1.12

GETS MFG_LOCALE Returns: MFG_LOCALE=""

SETS MOUNTPATIENT=2 or 0 Returns:200 OK Action: 2 mounts patient-rfs 0 ?


GETS METAINFS Returns: METAINFS=/tmp/metainfs


Universal

ETH <host ip> 1383 Action: Something with establishing a connection. must be sent before opening the second port.

LIST /path/to Returns: <directory path> list 200 OK


STAT /path/to Returns: ex. D 00000000 755 root:root 200 OK Notes: Seems to not always work as expected.


INFO Returns: PACKETSIZE=131072 VERSION=1.12 200 OK


GETS BATTERYLEVEL Returns: BATTERYLEVEL=<number> 200 OK


GETS BATTERYSTATUS Returns: BATTERYSTATUS=1 200 OK


STOR /path/to Action: Initiate file upload. Next: Send file data till EOF then send 101 EOF. Device responds with a lot of 100 ACK: <number> (Seems to be last amount of len(data) received.)

101 EOF Action: Ends STOR data transfer Notes:Must flush recv buffer first Returns: 200 OK


RETR /path/to Action: Downloads file. Next: Read socket buffer for data and send back 100 ACK: <number> (Seems to be last amount of len(data) received.) Ends: When 101 EOF is received.


RM /path/to Action: Removes file Returns: 200 OK


RMD <path> Action:Removes directory Returns: 200 OK


IPKG Action:? Notes:Found listed in source code, does something with firmware.


SIZE /path/to Returns a number, that doesn't seem to make sense


SETS DATETIME=20120126083030 Action: Sets time. Returns: 200 OK


GETS DATETIME Returns: DATETIME=20120126083014 200 OK


GETS TOTALSPACE Returns: TOTALSPACE=397307904 200 OK


GETS FREESPACE Returns: FREESPACE=265678848

GETS SERIAL Returns: SERIAL="XXXXXXXXXXXXXXXXXXXXX"

Untested

RUN Action: Runs shell script Next: Send data then 101 EOF

GETS SCRIPT_RUNNING

Reboot Sequences

Disconnect sequence

NOOP

DCON


Reboot after update or in general

RSET

NOOP

DCON


Reboot to usb mode UPD8

NOOP

DCON