LeapFrog Pollux Platform: Firmware
Over the years there has been a handful of revisions to the LeapFrog Pollux Platform Firmware. The Didj started on Linux Kernel version 2.6.20, which involved 2 versions over its lifespan the 2008 and 2009 versions. With the release of the [Leapster Explorer] the Kernel was upgraded to 2.6.31 and has since seen multiple updates, the latest being the [LeapPad Explorer] release.
The root file system or userspace has also seen some major upgrades, while most of it is not Open Source software, as in the UI or Flash Lite player, the basic programs are. They contain everything you'd expect to find on a Linux OS, echo, ls, vi, etc, etc.
This page contains various links to tutorials and information on the Firmware. While Didj was vastly different, it can be upgraded to run the new Linux version. This is recommended as most of the Linux work is being done with the latest firmware version. You can find links to older version information in the depreciated section. The updated firmware versions usually end up including whats been added, so often times it will be easier to just move to the latest, but they are there if you need them.
Latest Firmware Version LF-Linux-2503-20110602-1237
This is where to find generic Linux tutorials and information based on the latest LeapFrog Linux firmware, for LeapFrog User Interface specific information please refer to your particular device's page.
- Building libSDL
- Building SDL_ttf font library
- Building SDL_image library with jpg and png support
- Building SDL_mixer audio library
- Building tslib
- SDL Resources