Difference between revisions of "LeapFrog Pollux Platform: Hardwire Serial Connection"

From eLinux.org
Jump to: navigation, search
Line 2: Line 2:
  
  
[[File:didj-cart-pinout.jpg]
+
[File:didj-cart-pinout.jpg]
 
Picture from [http://sites.google.com/site/claudeschwarz/didjhacking2 Claude Schwarz’s BLOG]
 
Picture from [http://sites.google.com/site/claudeschwarz/didjhacking2 Claude Schwarz’s BLOG]

Revision as of 21:18, 9 February 2010

After some probing, I found the serial console (115200 8N1) comes out to the cartridge connector. Counting from the right, tx comes out on pin 12 and rx on pin 11. The voltage level goes between 0 and 3.3 volts. Hooking into a TTL to RS-232 converter, left over from another project, I can get to the console.


[File:didj-cart-pinout.jpg] Picture from Claude Schwarz’s BLOG