Difference between revisions of "LeapFrog Pollux Platform: Hardwire Serial Connection"
From eLinux.org
| Line 11: | Line 11: | ||
| − | [[File:didj-cart-pinout.jpg]] | + | [[File:didj-cart-pinout.jpg]]<br> |
Picture from [http://sites.google.com/site/claudeschwarz/didjhacking2 Claude Schwarz’s BLOG] | Picture from [http://sites.google.com/site/claudeschwarz/didjhacking2 Claude Schwarz’s BLOG] | ||
| + | |||
| + | [[File:didj-uart.jpg]] | ||
Revision as of 21:25, 9 February 2010
The serial console (115200 8N1) comes out to the cartridge connector.
- Counting from the right
- tx comes out on pin 12
- rx on pin 11.
The UART is using +3.3V TTL level which means you will need a RS232_Level_Shifter or use one of the following usb->rs232 breakout boards:
Picture from Claude Schwarz’s BLOG
