Difference between revisions of "LeapFrog Pollux Platform: Hardwire Serial Connection"

From eLinux.org
Jump to: navigation, search
Line 10: Line 10:
 
* [http://www.sparkfun.com/commerce/product_info.php?products_id=8531 CP2102 from Sparkfun]
 
* [http://www.sparkfun.com/commerce/product_info.php?products_id=8531 CP2102 from Sparkfun]
  
 
+
Picture from [http://sites.google.com/site/claudeschwarz/didjhacking2 Claude Schwarz’s BLOG]<br>
 
[[File:didj-cart-pinout.jpg]]<br>
 
[[File:didj-cart-pinout.jpg]]<br>
Picture from [http://sites.google.com/site/claudeschwarz/didjhacking2 Claude Schwarz’s BLOG]
+
 
  
 
[[File:didj-uart.jpg]]
 
[[File:didj-uart.jpg]]

Revision as of 21:26, 9 February 2010

The serial console (115200 8N1) comes out to the cartridge connector.

  • Counting from the right
    • tx comes out on pin 12
    • rx on pin 11.

The UART is using +3.3V TTL level which means you will need a RS232_Level_Shifter or use one of the following usb->rs232 breakout boards:

Picture from Claude Schwarz’s BLOG
Didj-cart-pinout.jpg


Didj-uart.jpg