LeapFrog Pollux Platform: Hardwire Serial Connection

From eLinux.org
Revision as of 21:25, 9 February 2010 by Prpplague (Talk | contribs)

Jump to: navigation, search

The serial console (115200 8N1) comes out to the cartridge connector.

  • Counting from the right
    • tx comes out on pin 12
    • rx on pin 11.

The UART is using +3.3V TTL level which means you will need a RS232_Level_Shifter or use one of the following usb->rs232 breakout boards:


Didj-cart-pinout.jpg
Picture from Claude Schwarz’s BLOG

Didj-uart.jpg