Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

LeapFrog Pollux Platform: Hardwire Serial Connection

From eLinux.org
Revision as of 08:48, 8 November 2008 by Nanoflick (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

After some probing, I found the serial console (115200 8N1) comes out to the cartridge connector. Counting from the right, tx comes out on pin 12 and rx on pin 11. The voltage level goes between 0 and 3.3 volts. Hooking into a TTL to RS-232 converter, left over from another project, I can get to the console.