Difference between revisions of "LeapFrog Pollux Platform: JTAG Pinouts"
From eLinux.org
| Line 80: | Line 80: | ||
== ARM JTAG Adapter Mapping == | == ARM JTAG Adapter Mapping == | ||
For details on mapping these pins to a standard 20-pin ARM JTAG adapter, see http://www.jtagtest.com/pinouts/arm20. | For details on mapping these pins to a standard 20-pin ARM JTAG adapter, see http://www.jtagtest.com/pinouts/arm20. | ||
| + | |||
| + | |||
| + | [[Category:Didj]] | ||
| + | [[Category:Leapster Explorer]] | ||
| + | [[Category:LeapPad Explorer]] | ||
| + | [[Category:LeapFrog Pollux Platform]] | ||
Latest revision as of 17:18, 12 July 2011
Didj
| Pin type | Didj Test Pad label |
|---|---|
| TRST | TP9 |
| TDI | TP10 |
| TMS | TP11 |
| TCK | TP12 |
| TDO | TP13 |
| (S)RST | TP103 [1] |
| GND | TP14 |
[1] As an alternative to TP103, either side of R43 (jumper/0 Ohms) or the right pad of R45 (unpopulated) works. This is near the other test pads.
Leapster Explorer
| Pin type | LX Test Pad label |
|---|---|
| TRST | RST |
| TDI | TDI |
| TMS | TMS |
| TCK | TCK |
| TDO | TDO |
| (S)RST | nRST |
| GND | GND |
ARM JTAG Adapter Mapping
For details on mapping these pins to a standard 20-pin ARM JTAG adapter, see http://www.jtagtest.com/pinouts/arm20.
