Difference between revisions of "LeapFrog Pollux Platform: Mount NFS Directory"
(→Configure Server and Client) |
m (moved LeapFrog Pollux Platform: Mount NFS DIrectory to LeapFrog Pollux Platform: Mount NFS Directory: spelling error) |
||
| (8 intermediate revisions by one user not shown) | |||
| Line 5: | Line 5: | ||
[[LeapFrog_Pollux_Platform:_Networking| Networking Setup]] | [[LeapFrog_Pollux_Platform:_Networking| Networking Setup]] | ||
| − | [ | + | For Didj [[Didj_Enable_Networking| Enable Networking]] using the lf1000_ff_eth_defconfig file or manually adding NFS support. |
| Line 17: | Line 17: | ||
== Configure Server and Client == | == Configure Server and Client == | ||
| − | |||
| − | |||
'' On Host '' | '' On Host '' | ||
| − | /home | + | Make sure your programs are installed. |
| + | sudo apt-get nfs-kernel-server nfs-common | ||
| + | |||
| + | |||
| + | Configure the /etc/exports file to point to the folder(s) you would like to make available for NFS mounting. Be sure to specify the IP of your device, otherwise anyone can mount it. | ||
| + | /home 10.0.0.2(rw,sync,no_root_squash) | ||
| Line 37: | Line 40: | ||
$ sudo /etc/init.d/nfs-kernel-server start | $ sudo /etc/init.d/nfs-kernel-server start | ||
| + | |||
| + | ''' For Leapster and LeapPad Explorers ''' | ||
'' On Device '' | '' On Device '' | ||
# modprobe nfs | # modprobe nfs | ||
# mountnfs | # mountnfs | ||
| − | # cd /mnt | + | # cd /mnt |
# ls | # ls | ||
| + | |||
| + | |||
| + | ''' For Network Enabled Didj ''' | ||
| + | |||
| + | mount -o nolock 10.0.0.1:/home /mnt | ||
| + | |||
At this point should see the contents of your /home dir | At this point should see the contents of your /home dir | ||
Latest revision as of 07:37, 12 July 2011
Contents |
Summary
This is a tutorial to setup an NFS folder on your host PC for your explorer to boot from. NFS mounting of a directory will enable you to test applications and scripts without having to copy anything to your Leapster or LeapPad Explorer.
Prerequisites
For Didj Enable Networking using the lf1000_ff_eth_defconfig file or manually adding NFS support.
Software Needed
Linux host PC
nfs-kernel-server
nfs-common
Configure Server and Client
On Host
Make sure your programs are installed.
sudo apt-get nfs-kernel-server nfs-common
Configure the /etc/exports file to point to the folder(s) you would like to make available for NFS mounting. Be sure to specify the IP of your device, otherwise anyone can mount it.
/home 10.0.0.2(rw,sync,no_root_squash)
On Device
You'll need to edit /usr/bin/mountnfs, change:
mount -o nolock `get-ip host`:/home/lfu/nfsroot/LF /LF
to:
mount -o nolock 10.0.0.1:/home/ /mnt
Start the server and client:
On Host
$ sudo /etc/init.d/nfs-kernel-server start
For Leapster and LeapPad Explorers
On Device
# modprobe nfs # mountnfs # cd /mnt # ls
For Network Enabled Didj
mount -o nolock 10.0.0.1:/home /mnt
At this point should see the contents of your /home dir
