Difference between revisions of "LeapFrog Pollux Platform: Source Code"

Revision as of 08:47, 17 November 2012

Official LeapFrog Sources

Didj

LeapFrog Open Source Compliance Document

2008-04-29 Release

• 2008 version

2009-04-22 Release

• 2009 version

Leapster Explorer

2010-10-26 Release

• LF-Linux-8291-20101026-1425.tar.gz 99MB

• LF-OE-346-20101026-0945.tar.gz 337MB

• LF-ThirdParty-8291-20101025-1623.tar.gzz 20MB

2010-06-10 Release

• LF-Linux-6905-20100610-0915.tar.gz 94MB

• LF-OE-251-20100614-0852.tar.bz2 320MB

• LF-ThirdParty-7299-20100609-1458.tar.gz 20MB

LeapPad Explorer

2011-06-02 Release

• LF-Linux-2503-20110602-1237.tar.gz 132MB

• LF-OE-545-20110602-1237.tar.gz 340MB

• LF-ThirdParty-7594-20110602-1237.tar.gz 20MB

2011-12-15 Release

• LF-Linux-2826-20111215-1417.tar.gz 132MB

• LF-OE-545-20111216-0926.tar.gz 282MB

• LF-ThirdParty-9494-20111215-1818.tar.gz 29MB

Homebrew

Didj

• Jburk's OpenDidj Linux Kernel/Rootfs Tree Git Repository

• Corbin's OpenDidj Linux Kernel Tree Git Repository

• Claude's OpenDidj Linux Kernel Tree (LF 2008 Source) Git Repository

• OpenLF
  • 2011-12-15 Sources adapted for Didj. With Emerald-Boot Git Repository
  • Buildroot set up for above kernel. Git Repository

Boot Loaders

Didj

• Lightning Boot

Explorer and LeapPad

• Emerald Boot

Toolchains

Should work on all sources codes listed.

Recommended

• RidgeRun Toolchain

Alternates

• Devroot (Works on bootloaders/U-Boot only)
• Creating a Kernel Build Scratchbox
• Setting up a Cross Compiler Build Environment and Basic Usage
• An alternate cross compiler, built with crosstool-NG

OE/BitBake

• Install OE and BitBake