Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

Difference between revisions of "Leapster Explorer: Over Clock"

From eLinux.org
Jump to: navigation, search
(simplified instructions for preliminary overclock, and describe permanent overclock)
m (Living Dangerously: fixed typo :P)
Line 22: Line 22:
 
It is important that you test your chosen cpu frequency first using the procedure in section 1, or you might be left with an unbootable device.
 
It is important that you test your chosen cpu frequency first using the procedure in section 1, or you might be left with an unbootable device.
  
  echo 532500000 > /usr/cpu_freq_in_hz
+
  echo 532500000 > /flags/cpu_freq_in_hz
  
 
Now just reboot, and your Leapster Explorer will automatically boot at the faster speed.  Again, '''this is dangerous''', so test it first with the above method. I cannot stress this enough.
 
Now just reboot, and your Leapster Explorer will automatically boot at the faster speed.  Again, '''this is dangerous''', so test it first with the above method. I cannot stress this enough.

Revision as of 01:25, 22 July 2010

It is very simple to overclock your explorer

Preliminary Overclock

Lets say you want to boost the speed up to 532.5mhz?

echo 532500000 > /usr/speed

to speed up your system it is as easy as typing the following

cat /usr/speed > /sys/devices/platform/lf1000-gpio/cpu_freq_in_hz

enjoy

Living Dangerously

Once you have tested your overclock, and are sure that it is stable, and you haven't made any typos... You can actually get the startup script to automagically set the cpu freq for you!

There is a line in /etc/init.d/rcS that checks for /flags/cpu_freq_in_hz, and automatically copies the contents to /sys/devices/platform/lf1000-gpio/cpu_freq_in_hz!

It is important that you test your chosen cpu frequency first using the procedure in section 1, or you might be left with an unbootable device.

echo 532500000 > /flags/cpu_freq_in_hz

Now just reboot, and your Leapster Explorer will automatically boot at the faster speed. Again, this is dangerous, so test it first with the above method. I cannot stress this enough.