Minnowboard:Basics

From eLinux.org
Revision as of 22:09, 11 August 2013 by Jayneil (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Contents of the box

When you purchase a MinnowBoard, the following items are included in the box as shown in Figure -1:

  1. MinnowBoard
  2. 5V Power Adaptor
  3. 4GB micro SD card preloaded with Angstrom Linux Distribution(Yocto Project Compatible)
  4. USB Cable


Figure-1: Box Contents

Anatomy of a MinnowBoard

Top Side

This section outlines the various components on the MinnowBoard. Figure -2 below annotates the important components on the top side of the MinnowBoard.

Figure-2: MinnowBoard Top Side

Below is a brief description of the micro USB and debugger ports which are annotated in Figure -2.

• Micro USB: This port can be used to access the contents of the MinnowBoard's microSD card as a removable drive on your desktop computer. Simply boot the MinnowBoard up and connect it to your desktop computer using a micro-USB cable.

• Debugger: This mini-USB port allows you to interact with the serial console of the MinnowBoard, so you can log into it and view debugging messages even when an external monitor and keyboard are not connected to the MinnowBoard. You need to use a terminal emulator on your desktop computer to access the serial console at a baud rate of 115200. This is demonstrated later in this guide in the Booting Angstrom section.

Bottom Side

Figure -3 below annotates the important components on the bottom side of the MinnowBoard.

Figure-3: MinnowBoard Bottom Side

Specifications

For detailed specifications of the MinnowBoard, please visit our website below:

http://www.minnowboard.org/technical-features/