Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

Difference between revisions of "Minnowboard:Lures Specifications"

Jump to: navigation, search
(Beacon Lure)
(Beacon Lure)
Line 69: Line 69:
* PWM Controlled RGB LED
* PWM Controlled RGB LED
* [[Beacon_Lure|Beacon Lure Page]]
* [[Beacon_Lure|Beacon Lure Page]]
* [[file:beacon_lure_reva.pdf|Schematic]]
* [[media:beacon_lure_reva.pdf|Schematic]]
== Trainer Lure ==
== Trainer Lure ==

Revision as of 04:08, 15 March 2013

NOTE: The Lure Board Specifications are under development and are a "work in progress"

Lure Types

Lure-Types.jpg Lure-Connectors.jpg

Type A

  • 106.68mm x 106.68mm (4.2" x 4.2")
  • Connector A99244-ND Female (digikey part number)
  • Mated height 17mm (when mated with 5mm base)
  • Hex Standoff 24436K-ND (digikey part number)
  • Placement over top of board
  • Four mounting holes at edges of minnow

Type-a-top.jpg Type-a-front.jpg Type-a-back.jpg Type-a-connector.jpg

Type B

  • 62.25mm x 106.68mm (2.45" x 4.2")
  • Connector A99231TR-ND Female (digikey part number)
  • Mated height 10mm (when mated with 5mm base)
  • Hex Standoff 24433K-ND (digikey part number)
  • Placement over top of board
  • Two screw mounting holes in center of minnow

Type-b-top.jpg Type-b-front.jpg Type-b-back.jpg Type-b-connector.jpg


  • 62.25mm x 62.25mm (2.45" x 2.45")
  • Connector A99192TR-ND Female (digikey part number)
  • Mated height 6mm (when mated with 5mm base)
  • No mounting standoffs (needs review)
  • Extends from side of minnow board
  • No mount holes (needs review)

Type-c-top.jpg Type-c-front.jpg Type-c-back.jpg Type-c-connector.jpg

Lure Features

Minnow Board and Passthrough

  • Connector A99205CT-ND Male (digikey part number)
  • Mated height base 5mm (plus female connector height)


  • i2c eeprom
  • recommended size 256k
  • CAT24C256W
  • configurable for address

LVDS Interface

Reference Lures

Beacon Lure

Trainer Lure

  • Type-A Lure
  • Atmel AVR (Arduino Compatible)
  • Prototype Area
  • Trainer Lure Page


  • Type-B Lure
  • Backlight Power supply
  • FPDLink-I connector (aka LVDS)
  • LVDS Lure Page

MiniPCIe / mSATA Lure

  • Type-A Lure
  • miniPCIe Connector
  • mSATA Connector

Prototype Breakout

  • Type-C Lure
  • Breakout for all low speed signals
    • i2c
    • spi
    • gpio
    • can

I/O Pad

  • Type-B Lure
  • 5 buttons
  • 5 LEDS
  • 2x10 Character LCD