Difference between revisions of "Minnowboard:Lures Specifications"

From eLinux.org
Jump to: navigation, search
(Lure Types)
(Automotive)
(26 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 +
'''NOTE: The Lure Board Specifications are under development and are a "work in progress"'''
 +
 
= Lure Types =
 
= Lure Types =
 +
[[File:Lure-Types.jpg|400px]] [[file:Lure-Connectors.jpg|400px]]
  
 
== Type A ==
 
== Type A ==
* 106mm x 106mm
+
* 106.68mm x 106.68mm (4.2" x 4.2")
* Connector A99244-ND (digikey)
+
* Connector A99244-ND Female (digikey part number)
* Mated height 17mm
+
* Mated height 17mm (when mated with 5mm base)
* Hex Standoff  24436K-ND (digikey)
+
* Hex Standoff  24436K-ND (digikey part number)
 
* Placement over top of board
 
* Placement over top of board
 
* Four mounting holes at edges of minnow
 
* Four mounting holes at edges of minnow
 +
[[File:type-a-top.jpg|200px]] [[File:type-a-front.jpg|200px]] [[File:type-a-back.jpg|200px]] [[file:type-a-connector.jpg|200px]]
  
 
== Type B ==
 
== Type B ==
* 60mm x 106mm
+
* 62.25mm x 106.68mm (2.45" x 4.2")
* Connector A99231TR-ND (digikey)
+
* Connector A99231TR-ND Female (digikey part number)
* Mated height 10mm
+
* Mated height 10mm (when mated with 5mm base)
* Hex Standoff 24433K-ND (digikey)
+
* Hex Standoff 24433K-ND (digikey part number)
 
* Placement over top of board
 
* Placement over top of board
 
* Two screw mounting holes in center of minnow
 
* Two screw mounting holes in center of minnow
 +
[[File:type-b-top.jpg|200px]] [[File:type-b-front.jpg|200px]] [[File:type-b-back.jpg|200px]] [[file:type-b-connector.jpg|200px]]
 +
  
 
== Type-C ==
 
== Type-C ==
* 60mm x 60mm
+
* 62.25mm x 62.25mm (2.45" x 2.45")
* Connector A99192TR-ND (digikey)
+
* Connector A99192TR-ND Female (digikey part number)
* Mated height 6mm
+
* Mated height 6mm (when mated with 5mm base)
 
* No mounting standoffs (needs review)
 
* No mounting standoffs (needs review)
 
* Extends from side of minnow board
 
* Extends from side of minnow board
 
* No mount holes (needs review)
 
* No mount holes (needs review)
 +
[[File:type-c-top.jpg|200px]] [[File:type-c-front.jpg|200px]] [[File:type-c-back.jpg|200px]] [[file:type-c-connector.jpg|200px]]
 +
 +
= Lure Features =
 +
 +
== Minnow Board and Passthrough ==
 +
 +
* Connector  A99205CT-ND Male (digikey part number)
 +
* Mated height base 5mm (plus female connector height)
 +
 +
== EEPROM ==
 +
 +
* i2c eeprom
 +
* recommended size 256k
 +
* CAT24C256W
 +
* configurable for address
 +
 +
== LVDS Interface ==
 +
 +
* single [http://en.wikipedia.org/wiki/FPD-Link FPDLink-I interface] (aka LVDS LCD interface)
 +
* 18 or 24 bpp support
 +
* Max pixel clock of 68MHz
 +
* Max resolution 1366x768 (approximately 1120000 total pixels)
 +
* Embedded Media Graphics Driver support
 +
* UEFI controls (??)
 +
* backlight PWM controls
 +
* [http://www.intel.com/content/dam/www/public/us/en/documents/white-papers/lvds-dynamic-backlight-brightness-paper.pdf LVDS Controls Reference Documentation from Intel]
 +
* [http://www.ti.com/product/sn75lvds82 FPDLink-I to RGB888 bridge(aka LVDS to parallel)]
 +
* [[BoardBringupLCD|Presentation and References for LCD interfaces]]
 +
 +
 +
= Reference Lures =
 +
 +
== Beacon Lure ==
 +
 +
* Type-C Lure
 +
* 7 Segment Display via Shift Register
 +
* EEPROM
 +
* PWM Controlled RGB LED
 +
* [[MinnowBoard:Beacon_Lure|Beacon Lure Page]]
 +
 +
== Trainer Lure ==
 +
 +
* Type-A Lure
 +
* Atmel AVR (Arduino Compatible)
 +
* Prototype Area
 +
* EEPROM
 +
* Trainer Lure Page
 +
* [[MinnowBoard:Trainer_Lure| Trainer Lure Wiki Page]]
 +
 +
== LVDS Lure ==
 +
 +
* Type-B Lure
 +
* Backlight Power supply
 +
* FPDLink-I connector (aka LVDS)
 +
* EEPROM
 +
* LVDS Lure Page
 +
 +
== MiniPCIe / mSATA Lure ==
 +
 +
* Type-A Lure
 +
* EEPROM
 +
* miniPCIe Connector
 +
* mSATA Connector
 +
 +
== Prototype Breakout ==
 +
 +
* Type-C Lure
 +
* Breakout for all low speed signals
 +
** i2c
 +
** spi
 +
** gpio
 +
** can
 +
 +
== I/O Pad ==
 +
 +
* Type-B Lure
 +
* 5 buttons
 +
* 5 LEDS
 +
* 2x10 Character LCD
 +
* EEPROM
 +
 +
== Automotive ==
 +
 +
* CAN bus interfaces
 +
* 12V power input
 +
* 12V switched power rails
 +
* Voltage Sampling
 +
* [[MinnowBoard:Automotive Lure| Automotive Lure wiki page]]
 +
 +
 +
[[Category: MinnowBoard]]
 +
[[Category: MinnowBoard Expansion Boards]]
 +
[[Category: CircuitCo]]

Revision as of 18:44, 2 April 2013

NOTE: The Lure Board Specifications are under development and are a "work in progress"

Lure Types

Lure-Types.jpg Lure-Connectors.jpg

Type A

  • 106.68mm x 106.68mm (4.2" x 4.2")
  • Connector A99244-ND Female (digikey part number)
  • Mated height 17mm (when mated with 5mm base)
  • Hex Standoff 24436K-ND (digikey part number)
  • Placement over top of board
  • Four mounting holes at edges of minnow

Type-a-top.jpg Type-a-front.jpg Type-a-back.jpg Type-a-connector.jpg

Type B

  • 62.25mm x 106.68mm (2.45" x 4.2")
  • Connector A99231TR-ND Female (digikey part number)
  • Mated height 10mm (when mated with 5mm base)
  • Hex Standoff 24433K-ND (digikey part number)
  • Placement over top of board
  • Two screw mounting holes in center of minnow

Type-b-top.jpg Type-b-front.jpg Type-b-back.jpg Type-b-connector.jpg


Type-C

  • 62.25mm x 62.25mm (2.45" x 2.45")
  • Connector A99192TR-ND Female (digikey part number)
  • Mated height 6mm (when mated with 5mm base)
  • No mounting standoffs (needs review)
  • Extends from side of minnow board
  • No mount holes (needs review)

Type-c-top.jpg Type-c-front.jpg Type-c-back.jpg Type-c-connector.jpg

Lure Features

Minnow Board and Passthrough

  • Connector A99205CT-ND Male (digikey part number)
  • Mated height base 5mm (plus female connector height)

EEPROM

  • i2c eeprom
  • recommended size 256k
  • CAT24C256W
  • configurable for address

LVDS Interface


Reference Lures

Beacon Lure

  • Type-C Lure
  • 7 Segment Display via Shift Register
  • EEPROM
  • PWM Controlled RGB LED
  • Beacon Lure Page

Trainer Lure

LVDS Lure

  • Type-B Lure
  • Backlight Power supply
  • FPDLink-I connector (aka LVDS)
  • EEPROM
  • LVDS Lure Page

MiniPCIe / mSATA Lure

  • Type-A Lure
  • EEPROM
  • miniPCIe Connector
  • mSATA Connector

Prototype Breakout

  • Type-C Lure
  • Breakout for all low speed signals
    • i2c
    • spi
    • gpio
    • can

I/O Pad

  • Type-B Lure
  • 5 buttons
  • 5 LEDS
  • 2x10 Character LCD
  • EEPROM

Automotive