Difference between revisions of "Minnowboard:Lures Specifications"
(→Lure Types) |
(→Automotive) |
||
(25 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
+ | '''NOTE: The Lure Board Specifications are under development and are a "work in progress"''' | ||
+ | |||
= Lure Types = | = Lure Types = | ||
+ | [[File:Lure-Types.jpg|400px]] [[file:Lure-Connectors.jpg|400px]] | ||
== Type A == | == Type A == | ||
* 106.68mm x 106.68mm (4.2" x 4.2") | * 106.68mm x 106.68mm (4.2" x 4.2") | ||
− | * Connector | + | * Connector A99244-ND Female (digikey part number) |
− | * Mated height 17mm | + | * Mated height 17mm (when mated with 5mm base) |
− | * Hex Standoff 24436K-ND (digikey) | + | * Hex Standoff 24436K-ND (digikey part number) |
* Placement over top of board | * Placement over top of board | ||
* Four mounting holes at edges of minnow | * Four mounting holes at edges of minnow | ||
+ | [[File:type-a-top.jpg|200px]] [[File:type-a-front.jpg|200px]] [[File:type-a-back.jpg|200px]] [[file:type-a-connector.jpg|200px]] | ||
== Type B == | == Type B == | ||
* 62.25mm x 106.68mm (2.45" x 4.2") | * 62.25mm x 106.68mm (2.45" x 4.2") | ||
− | * Connector A99231TR-ND (digikey) | + | * Connector A99231TR-ND Female (digikey part number) |
− | * Mated height 10mm | + | * Mated height 10mm (when mated with 5mm base) |
− | * Hex Standoff 24433K-ND (digikey) | + | * Hex Standoff 24433K-ND (digikey part number) |
* Placement over top of board | * Placement over top of board | ||
* Two screw mounting holes in center of minnow | * Two screw mounting holes in center of minnow | ||
+ | [[File:type-b-top.jpg|200px]] [[File:type-b-front.jpg|200px]] [[File:type-b-back.jpg|200px]] [[file:type-b-connector.jpg|200px]] | ||
+ | |||
== Type-C == | == Type-C == | ||
* 62.25mm x 62.25mm (2.45" x 2.45") | * 62.25mm x 62.25mm (2.45" x 2.45") | ||
− | * Connector A99192TR-ND (digikey) | + | * Connector A99192TR-ND Female (digikey part number) |
− | * Mated height 6mm | + | * Mated height 6mm (when mated with 5mm base) |
* No mounting standoffs (needs review) | * No mounting standoffs (needs review) | ||
* Extends from side of minnow board | * Extends from side of minnow board | ||
* No mount holes (needs review) | * No mount holes (needs review) | ||
+ | [[File:type-c-top.jpg|200px]] [[File:type-c-front.jpg|200px]] [[File:type-c-back.jpg|200px]] [[file:type-c-connector.jpg|200px]] | ||
+ | |||
+ | = Lure Features = | ||
+ | |||
+ | == Minnow Board and Passthrough == | ||
+ | |||
+ | * Connector A99205CT-ND Male (digikey part number) | ||
+ | * Mated height base 5mm (plus female connector height) | ||
+ | |||
+ | == EEPROM == | ||
+ | |||
+ | * i2c eeprom | ||
+ | * recommended size 256k | ||
+ | * CAT24C256W | ||
+ | * configurable for address | ||
+ | |||
+ | == LVDS Interface == | ||
+ | |||
+ | * single [http://en.wikipedia.org/wiki/FPD-Link FPDLink-I interface] (aka LVDS LCD interface) | ||
+ | * 18 or 24 bpp support | ||
+ | * Max pixel clock of 68MHz | ||
+ | * Max resolution 1366x768 (approximately 1120000 total pixels) | ||
+ | * Embedded Media Graphics Driver support | ||
+ | * UEFI controls (??) | ||
+ | * backlight PWM controls | ||
+ | * [http://www.intel.com/content/dam/www/public/us/en/documents/white-papers/lvds-dynamic-backlight-brightness-paper.pdf LVDS Controls Reference Documentation from Intel] | ||
+ | * [http://www.ti.com/product/sn75lvds82 FPDLink-I to RGB888 bridge(aka LVDS to parallel)] | ||
+ | * [[BoardBringupLCD|Presentation and References for LCD interfaces]] | ||
+ | |||
+ | |||
+ | = Reference Lures = | ||
+ | |||
+ | == Beacon Lure == | ||
+ | |||
+ | * Type-C Lure | ||
+ | * 7 Segment Display via Shift Register | ||
+ | * EEPROM | ||
+ | * PWM Controlled RGB LED | ||
+ | * [[MinnowBoard:Beacon_Lure|Beacon Lure Page]] | ||
+ | |||
+ | == Trainer Lure == | ||
+ | |||
+ | * Type-A Lure | ||
+ | * Atmel AVR (Arduino Compatible) | ||
+ | * Prototype Area | ||
+ | * EEPROM | ||
+ | * Trainer Lure Page | ||
+ | * [[MinnowBoard:Trainer_Lure| Trainer Lure Wiki Page]] | ||
+ | |||
+ | == LVDS Lure == | ||
+ | |||
+ | * Type-B Lure | ||
+ | * Backlight Power supply | ||
+ | * FPDLink-I connector (aka LVDS) | ||
+ | * EEPROM | ||
+ | * LVDS Lure Page | ||
+ | |||
+ | == MiniPCIe / mSATA Lure == | ||
+ | |||
+ | * Type-A Lure | ||
+ | * EEPROM | ||
+ | * miniPCIe Connector | ||
+ | * mSATA Connector | ||
+ | |||
+ | == Prototype Breakout == | ||
+ | |||
+ | * Type-C Lure | ||
+ | * Breakout for all low speed signals | ||
+ | ** i2c | ||
+ | ** spi | ||
+ | ** gpio | ||
+ | ** can | ||
+ | |||
+ | == I/O Pad == | ||
+ | |||
+ | * Type-B Lure | ||
+ | * 5 buttons | ||
+ | * 5 LEDS | ||
+ | * 2x10 Character LCD | ||
+ | * EEPROM | ||
+ | |||
+ | == Automotive == | ||
+ | |||
+ | * CAN bus interfaces | ||
+ | * 12V power input | ||
+ | * 12V switched power rails | ||
+ | * Voltage Sampling | ||
+ | * [[MinnowBoard:Automotive Lure| Automotive Lure wiki page]] | ||
+ | |||
+ | |||
+ | [[Category: MinnowBoard]] | ||
+ | [[Category: MinnowBoard Expansion Boards]] | ||
+ | [[Category: CircuitCo]] |
Revision as of 11:44, 2 April 2013
NOTE: The Lure Board Specifications are under development and are a "work in progress"
Contents
Lure Types
Type A
- 106.68mm x 106.68mm (4.2" x 4.2")
- Connector A99244-ND Female (digikey part number)
- Mated height 17mm (when mated with 5mm base)
- Hex Standoff 24436K-ND (digikey part number)
- Placement over top of board
- Four mounting holes at edges of minnow
Type B
- 62.25mm x 106.68mm (2.45" x 4.2")
- Connector A99231TR-ND Female (digikey part number)
- Mated height 10mm (when mated with 5mm base)
- Hex Standoff 24433K-ND (digikey part number)
- Placement over top of board
- Two screw mounting holes in center of minnow
Type-C
- 62.25mm x 62.25mm (2.45" x 2.45")
- Connector A99192TR-ND Female (digikey part number)
- Mated height 6mm (when mated with 5mm base)
- No mounting standoffs (needs review)
- Extends from side of minnow board
- No mount holes (needs review)
Lure Features
Minnow Board and Passthrough
- Connector A99205CT-ND Male (digikey part number)
- Mated height base 5mm (plus female connector height)
EEPROM
- i2c eeprom
- recommended size 256k
- CAT24C256W
- configurable for address
LVDS Interface
- single FPDLink-I interface (aka LVDS LCD interface)
- 18 or 24 bpp support
- Max pixel clock of 68MHz
- Max resolution 1366x768 (approximately 1120000 total pixels)
- Embedded Media Graphics Driver support
- UEFI controls (??)
- backlight PWM controls
- LVDS Controls Reference Documentation from Intel
- FPDLink-I to RGB888 bridge(aka LVDS to parallel)
- Presentation and References for LCD interfaces
Reference Lures
Beacon Lure
- Type-C Lure
- 7 Segment Display via Shift Register
- EEPROM
- PWM Controlled RGB LED
- Beacon Lure Page
Trainer Lure
- Type-A Lure
- Atmel AVR (Arduino Compatible)
- Prototype Area
- EEPROM
- Trainer Lure Page
- Trainer Lure Wiki Page
LVDS Lure
- Type-B Lure
- Backlight Power supply
- FPDLink-I connector (aka LVDS)
- EEPROM
- LVDS Lure Page
MiniPCIe / mSATA Lure
- Type-A Lure
- EEPROM
- miniPCIe Connector
- mSATA Connector
Prototype Breakout
- Type-C Lure
- Breakout for all low speed signals
- i2c
- spi
- gpio
- can
I/O Pad
- Type-B Lure
- 5 buttons
- 5 LEDS
- 2x10 Character LCD
- EEPROM
Automotive
- CAN bus interfaces
- 12V power input
- 12V switched power rails
- Voltage Sampling
- Automotive Lure wiki page