Difference between revisions of "Minnowboard:Lures Specifications"

From eLinux.org
Jump to: navigation, search
(LVDS Interface)
(LVDS Interface)
Line 41: Line 41:
 
== LVDS Interface ==
 
== LVDS Interface ==
  
* single FPDLink-I interface
+
* single [http://en.wikipedia.org/wiki/FPD-Link FPDLink-I interface] (aka LVDS LCD interface)
 
* 18 or 24 bpp support
 
* 18 or 24 bpp support
 +
* Max pixel clock of 68MHz
 +
* Max resolution 1366x768 (approximately 1120000 total pixels)
 
* Embedded Media Graphics Driver support
 
* Embedded Media Graphics Driver support
 
* UEFI controls (??)
 
* UEFI controls (??)
Line 48: Line 50:
 
* [http://www.intel.com/content/dam/www/public/us/en/documents/white-papers/lvds-dynamic-backlight-brightness-paper.pdf LVDS Controls Reference Documentation from Intel]  
 
* [http://www.intel.com/content/dam/www/public/us/en/documents/white-papers/lvds-dynamic-backlight-brightness-paper.pdf LVDS Controls Reference Documentation from Intel]  
 
* [http://www.ti.com/product/sn75lvds82 FPDLink-I to RGB888 bridge(aka LVDS to parallel)]
 
* [http://www.ti.com/product/sn75lvds82 FPDLink-I to RGB888 bridge(aka LVDS to parallel)]
 +
* [[BoardBringupLCD|Presentation and References for LCD interfaces]]

Revision as of 12:22, 5 March 2013

Lure Types

Type A

  • 106.68mm x 106.68mm (4.2" x 4.2")
  • Connector A99244-ND Female (digikey part number)
  • Mated height 17mm
  • Hex Standoff 24436K-ND (digikey part number)
  • Placement over top of board
  • Four mounting holes at edges of minnow

Type B

  • 62.25mm x 106.68mm (2.45" x 4.2")
  • Connector A99231TR-ND Female (digikey part number)
  • Mated height 10mm
  • Hex Standoff 24433K-ND (digikey part number)
  • Placement over top of board
  • Two screw mounting holes in center of minnow

Type-C

  • 62.25mm x 62.25mm (2.45" x 2.45")
  • Connector A99192TR-ND Female (digikey part number)
  • Mated height 6mm
  • No mounting standoffs (needs review)
  • Extends from side of minnow board
  • No mount holes (needs review)

Lure Features

Minnow Board and Passthrough

  • Connector A99205CT-ND Male (digikey part number)
  • Mated height base 5mm (plus female connector height)

EEPROM

  • i2c eeprom
  • recommended size 256k
  • CAT24C256W
  • configurable for address

LVDS Interface