Difference between revisions of "Minnowboard:MaxLures"
(initial lure page) |
|||
Line 1: | Line 1: | ||
MinnowBoard MAX Lure Information | MinnowBoard MAX Lure Information | ||
− | |||
= Planned Lures = | = Planned Lures = | ||
− | == Calamari | + | == Calamari Lure == |
− | + | * SPI Based ADC | |
− | + | * 10K Slider POT | |
− | + | * RGB LED | |
− | + | * 2 PWM LEDS | |
+ | * 2 TTL UART Headers | ||
+ | * 7-Segment Display with 595 shift register | ||
+ | * I2C EEPROM | ||
+ | * 3 Buttons | ||
− | + | == Ika Lure == | |
− | + | * Arduino Uno compatible headers | |
− | |||
− | |||
− | == Seacat | + | == Seacat Lure == |
+ | * mPCIe Slot | ||
+ | * mSATA Slot | ||
+ | |||
+ | == Jetsam Lure == | ||
+ | * Single mPCIe Slot | ||
+ | |||
+ | == Flotsam Lure == | ||
+ | * single mPCIE Slot | ||
+ | |||
+ | == Nic Lure == | ||
+ | * Single Gigabit Ethernet | ||
+ | |||
+ | == Prototype Lure == | ||
+ | * Generic Prototype Area on 0.1" grids | ||
+ | |||
+ | == Can Bus Lure == | ||
+ | * standard CAN Bus | ||
+ | * Option for STN1110 | ||
+ | |||
+ | == RS-485 Lure == | ||
+ | * standard RS-485 | ||
+ | |||
+ | == RS-232 Lure == | ||
+ | * 2 DB-9 connectors | ||
+ | |||
+ | == Relay Cape == | ||
+ | * 4 Relays | ||
+ | * GPIO Controls | ||
+ | |||
+ | == USB Hub Lure == | ||
+ | * 4 USB Host Ports | ||
+ | |||
+ | == PWM Lure == | ||
+ | * 32 PWM Outputs | ||
+ | |||
+ | == ADC Lure == | ||
+ | * 8 ADC inputs | ||
+ | |||
+ | == Moto Lure == | ||
+ | * Dual H-Bridge | ||
+ | |||
+ | == Audio Lure == | ||
+ | * Analog Audio Ouput | ||
+ | * Analog Audio Input | ||
+ | |||
+ | == MiniDisplay Lure == | ||
+ | * SPI Based TFT Display | ||
+ | * 2.8" | ||
+ | * 4-Wire Resistive Touch |
Revision as of 10:39, 14 August 2014
MinnowBoard MAX Lure Information
Contents
Planned Lures
Calamari Lure
- SPI Based ADC
- 10K Slider POT
- RGB LED
- 2 PWM LEDS
- 2 TTL UART Headers
- 7-Segment Display with 595 shift register
- I2C EEPROM
- 3 Buttons
Ika Lure
- Arduino Uno compatible headers
Seacat Lure
- mPCIe Slot
- mSATA Slot
Jetsam Lure
- Single mPCIe Slot
Flotsam Lure
- single mPCIE Slot
Nic Lure
- Single Gigabit Ethernet
Prototype Lure
- Generic Prototype Area on 0.1" grids
Can Bus Lure
- standard CAN Bus
- Option for STN1110
RS-485 Lure
- standard RS-485
RS-232 Lure
- 2 DB-9 connectors
Relay Cape
- 4 Relays
- GPIO Controls
USB Hub Lure
- 4 USB Host Ports
PWM Lure
- 32 PWM Outputs
ADC Lure
- 8 ADC inputs
Moto Lure
- Dual H-Bridge
Audio Lure
- Analog Audio Ouput
- Analog Audio Input
MiniDisplay Lure
- SPI Based TFT Display
- 2.8"
- 4-Wire Resistive Touch