Difference between revisions of "Minnowboard:SPI Boot flash"

From eLinux.org
Jump to: navigation, search
(Programming Interface)
(Programming Interface)
Line 32: Line 32:
 
| MOSI
 
| MOSI
 
| Data Input to serial flash
 
| Data Input to serial flash
 +
|-
 
| 7
 
| 7
 
| nPRG_EN
 
| nPRG_EN

Revision as of 21:21, 15 May 2013

the MinnowBoard uses a SPI based serial flash memory to load the initial code into the Intel Atom E640 series processor. The MinnowBoard uses a WinBond W25Q32 (datasheet) which has a total of 4096KB of storage which can be flashed with a UEFI image or other custom firmware.

Programming Interface

the MinnowBoard has a 2x4 header that has 0.1" spacing for programming the SPI based serial flash memory.

Programming Header
Pin number Main Function Note
1 +3.3V Power Supports on +3.3V
2 GND system ground
3 nCS Chip Select Active Low
4 SCK SPI Clock
5 MISO Data Output from serial flash
6 MOSI Data Input to serial flash
7 nPRG_EN Program Enable Active Low

Applications and Hardware

  • Flashrom is an open source utility that allows you to work with the SPI based serial flash memory on the MinnowBoard.
  • Flashrom supports a wide range of flash devices (Supported Hardware) including the WinBond W25Q32.
  • Flashrom can automatically detect the presence of the WinBond W25Q32 and provide full read/erase/write functionality.
  • Flashrom can use the many open as well as proprietary hardware tools such as