Difference between revisions of "Nail Board"

From eLinux.org
Jump to: navigation, search
Line 10: Line 10:
 
* power led
 
* power led
 
* usb powered
 
* usb powered
* usb serial port console
+
* usb serial port console (via internal FT2232)
* usb jtag interface
+
* usb jtag interface (via internal FT2232)
* usb gadget interface
+
* usb gadget interface (via the Hammer Board)
* usb host interface
+
** Ethernet Gadget Driver (default)
 +
** Serial Port Gadget Driver
 +
** Mass Storage Driver
 +
* usb host interface (via the Hammer Board)
 +
** USB 1.1 Compliant
 +
** Low Speed Support (2mb)
 +
** Full Speed Support (12mb)
 
* 2x10 expansion connector
 
* 2x10 expansion connector
* 0.1" breakout header
+
* Hammer Board Breakout Header
 +
** 0.1" headers
 +
** all 40 pins available
  
  
 
[[Image:nail_case.jpg]]
 
[[Image:nail_case.jpg]]

Revision as of 01:20, 23 January 2008

Nail profile.jpg

Specs:

  • 3 user leds available
    • DS2 and DS3 on the Nail Board
    • USER led on the Hammer Board
  • 2 interrupt driven pushbuttons
  • reset button
  • power led
  • usb powered
  • usb serial port console (via internal FT2232)
  • usb jtag interface (via internal FT2232)
  • usb gadget interface (via the Hammer Board)
    • Ethernet Gadget Driver (default)
    • Serial Port Gadget Driver
    • Mass Storage Driver
  • usb host interface (via the Hammer Board)
    • USB 1.1 Compliant
    • Low Speed Support (2mb)
    • Full Speed Support (12mb)
  • 2x10 expansion connector
  • Hammer Board Breakout Header
    • 0.1" headers
    • all 40 pins available


Nail case.jpg