Difference between revisions of "Nail Board"

From eLinux.org
Jump to: navigation, search
Line 7: Line 7:
 
** USER led on the Hammer Board
 
** USER led on the Hammer Board
 
* 2 interrupt driven pushbuttons
 
* 2 interrupt driven pushbuttons
 +
* PWM buzzer
 
* reset button
 
* reset button
 
* power led
 
* power led

Revision as of 01:58, 23 January 2008

Nail profile.jpg

Specs:

  • 3 user leds available
    • DS2 and DS3 on the Nail Board
    • USER led on the Hammer Board
  • 2 interrupt driven pushbuttons
  • PWM buzzer
  • reset button
  • power led
  • usb powered
  • usb serial port console (via internal FT2232)
  • usb jtag interface (via internal FT2232)
  • usb controlled gpios (4 via internal FT2232)
  • usb gadget interface (via the Hammer Board)
    • Ethernet Gadget Driver (default)
    • Serial Port Gadget Driver
    • Mass Storage Driver
  • usb host interface (via the Hammer Board)
    • USB 1.1 Compliant
    • Low Speed Support (2mb)
    • Full Speed Support (12mb)
  • 2x10 expansion connector
    • +5v available
    • +3.3v available
    • Headers can be jumper configured
    • 2 wire Serial Port
    • SPI Port
    • GPIOS
    • External Interrupts
  • Hammer Board Breakout Header
    • 0.1" headers
    • all 40 pins available


Nail case.jpg