Difference between revisions of "Nail Board"

From eLinux.org
Jump to: navigation, search
Line 11: Line 11:
 
* power led
 
* power led
 
* usb powered
 
* usb powered
* usb serial port console (via internal FT2232)
+
* usb serial port console (via internal FT2232) see [[Nail_Board_Devices|USB Device Listing]]
* usb jtag interface (via internal FT2232)
+
* usb jtag interface (via internal FT2232) see [[Nail_Board_Devices|USB Device Listing]]
* usb controlled gpios (4 via internal FT2232)
+
* usb controlled gpios (4 via internal FT2232) see [[Nail_Board_Devices|USB Device Listing]]
* usb gadget interface (via the Hammer Board)
+
* usb gadget interface (via the Hammer Board) see [[Nail_Board_Devices|USB Device Listing]]
 
** Ethernet Gadget Driver (default)
 
** Ethernet Gadget Driver (default)
 
** Serial Port Gadget Driver
 
** Serial Port Gadget Driver
Line 35: Line 35:
 
** all 40 pins available
 
** all 40 pins available
  
[[Nail_Board_Devices USB Device Listing]]
 
  
 
[[Image:nail_case.jpg]]
 
[[Image:nail_case.jpg]]

Revision as of 01:28, 9 February 2008

Nail profile.jpg

Specs:

  • 3 user leds available
    • DS2 and DS3 on the Nail Board
    • USER led on the Hammer Board
  • 2 interrupt driven pushbuttons
  • PWM buzzer
  • reset button
  • power led
  • usb powered
  • usb serial port console (via internal FT2232) see USB Device Listing
  • usb jtag interface (via internal FT2232) see USB Device Listing
  • usb controlled gpios (4 via internal FT2232) see USB Device Listing
  • usb gadget interface (via the Hammer Board) see USB Device Listing
    • Ethernet Gadget Driver (default)
    • Serial Port Gadget Driver
    • Mass Storage Driver
  • usb host interface (via the Hammer Board)
    • USB 1.1 Compliant
    • Low Speed Support (2mb)
    • Full Speed Support (12mb)
  • 2x10 expansion connector
    • +5v available
    • +3.3v available
    • Headers can be jumper configured
    • 2 wire Serial Port
    • SPI Port
    • I2C
    • GPIOS
    • External Interrupts
  • Hammer Board Breakout Header
    • 0.1" headers
    • all 40 pins available


Nail case.jpg

Nail-side.jpg

Nail-top.jpg